Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

new page on my website may have shop applications

Featured Replies

This page has pictures of "caulk-in" threaded anchors that I use for all sorts of fastening jobs into masonry.  They come in a variety of sizes.  The size in these pictures is 10-24.

I use them for mounting service panels, and even outlet boxes to masonry, whether brick, block, stone, or concrete.  If you drill a small pilot hole first, it makes it easy to get the larger finished size hole in exactly the right place.  If there are multiple inserts needed, say for something like a service panel, set the first anchor, install a screw in one corner of the box, and use the other holes to drill your small pilot hole.

The insertion tool is made by Greenlee.  They aren't cheap if you buy one new, but they come up all the time on ebay.  I have them up through sizes to a 3/8" bolt.

There is another type of insertion tool where you put the anchor in the back end of the hole and pound the lead caulking around it.  I used them for years before I found out about the Greenlee insertion tool.  The trouble with the old type is the hole has to be an exact depth for the length of your machine screws, and you can't use them in some parts of concrete blocks.  The Greenlee tool always leaves the threaded insert close to the surface.  You just drill the hole plenty deep without worrying about it being an exact depth, and it makes it easier to plan on fastener length before starting the job.

Hope it's okay to post this here, and I hope you enjoy the rest of the stuff on the page.

http://historic-house-restoration.com/chimneyflashing.html

 

Pretty cool Tom. We use Greenlee hydraulic hole punches for popping holes in stainless. You're right, not cheap but a quality product. I like the way you made a kerf cut in the brick for the flashing to rest in.

  • Author

For cutting slots in masonry, I buy the cheap, 30 buck 4-1/2" sidegrinders from Walmart for such dirty, dusty work knowing that they won't last long, and just toss it when it dies.  Work like that is only done on the windiest of days, and then with a respirator and leaf blower help. If done on the ground for basement waterproofing, I'll have a helper with a slow running water hose to keep the dust down.  Say if I want to cut 1/2" deep, I'll mark with a Shapie 1/2" in from the edge of the diamond wheel, turn the grinder on, and mark it all the way around for a guide line.

  • Author

The anchor setting tool is called:  Greenlee screw anchor expander.  You can get them off ebay for less than half of new price fairly regularly.

http://www.amazon.com/gp/product/B002JAWLQA/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687702&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001SGP1I6&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1YHXQC2C6TJRWTEXECH8

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.