SmithCreek Posted April 21, 2016 Author Report Posted April 21, 2016 20 hours ago, Pug said: A festool router and table is about 200 bucks, right? that aint funny, I fell out of my chair. thanks, I am going melamine/counter top shopping and I am hoping Lowes or HD will have a Bosch table I can look at. I have a fair amount of 3/4 plywood from some stage platforms to experiment with so I may give that a try first. I have been checking YT vids and it has prompted another question, what bit do I need to mill out the ledge with for the plate? I have not bought a router yet but am leaning toward the Bosch recommended by midtnwoodworker . thanks again. creek Quote
SmithCreek Posted April 21, 2016 Author Report Posted April 21, 2016 18 hours ago, TIODS said: So, if the table was the most important part, you could probably build and be in your price range. There's a ton of plans and youtube videos out there to build a router table. It is important that you decide on a lift before you do the build. The lift will be above and beyond your budget but, you'll need to make that decision before you build. thanks TIODS. I am thinking there is going to have to be some give in the budget, maybe a lot of give. I am torn. on one hand I read from folks who have been perfectly happy with a store bought ( Lowes / HD )table but on the other hand I know I feel a little stung with the Ryobi TS, ( sled issue ) though I have another idea on how to deal with that when I get a chance to take a good look at it again. I have researched building a lift as well but not as much so thank you for pointing that out, if I do build I don't want to do it twice. I definitely cant spend 4 or 5 hundred bucks on a table and probably wouldn't if I could so the research continues. thanks again. creek Quote
rodger. Posted April 22, 2016 Report Posted April 22, 2016 8 hours ago, SmithCreek said: that aint funny, I fell out of my chair. thanks, I am going melamine/counter top shopping and I am hoping Lowes or HD will have a Bosch table I can look at. I have a fair amount of 3/4 plywood from some stage platforms to experiment with so I may give that a try first. I have been checking YT vids and it has prompted another question, what bit do I need to mill out the ledge with for the plate? I have not bought a router yet but am leaning toward the Bosch recommended by midtnwoodworker . thanks again. creek I have the bosch mr23 kit (newer kit) and its great. Check out my review in the reviews section if you like. Quote
SmithCreek Posted April 27, 2016 Author Report Posted April 27, 2016 On 4/22/2016 at 10:35 PM, Pug said: I have the bosch mr23 kit (newer kit) and its great. Check out my review in the reviews section if you like. will do Pug. many thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.