SmithCreek Posted April 19, 2016 Report Posted April 19, 2016 I am looking at getting a inexpensive router table and router but have not a clue, it will get light use and I would like to stay at or under 200 bucks. any of you guys have anything in that range that you would recommend? Quote
midtnwoodworker Posted April 19, 2016 Report Posted April 19, 2016 This is not a bad unit for the price you are wanting, but does not come with a router. http://www.amazon.com/Bosch-RA1171-Cabinet-Style-Router/dp/B000H14DLY/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1461095339&sr=1-2&keywords=router+table I would personally build my own router table, and you can do that for well under your budget. Then you could buy a decent router with the money left over. http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1461095387&sr=1-1&keywords=bosch+router Quote
minorhero Posted April 19, 2016 Report Posted April 19, 2016 I am not aware of a combination router and router table you can buy for under 200. The cheaper router tables are so small as to be almost useless anyway. You can build a router table fairly cheaply. How cheap depends on how many features you want. You can make a 2x4 base and put a piece of plywood on top and screw your router directly into that. It's not great but if you only need it for one project it could serve. Add a router plate and the cost goes up. Add a paddle switch a fence, some dust control fittings, The cost goes up. The Bosch linked above is a good router for a first table or for hand work. Quote
..Kev Posted April 19, 2016 Report Posted April 19, 2016 Agreed.. You could surf CL but, I think in that price range for what you're wanting, you're going to be sadly disappointed with the offerings out there. You may want to look into building your own. This will get you closer to your budget on the table but, will not touch the router or the lift. 1 Quote
weithman5 Posted April 19, 2016 Report Posted April 19, 2016 i love my skil router 90ish bucks, combo unit. great for light use. 1 Quote
Patrick Posted April 20, 2016 Report Posted April 20, 2016 For your budget, find a used 2 1/4hp router first. Next buy a metal base plate that will fit your new router. These two items may use up most of your budget but i think you'd be disappointed without at least a 2 1/4 hp router under a table. The metal plate is going to cost a bit more than a plastic one ($30 more?) but it's a worthwhile upgrade IMO. use online resources to make your own table and fence. It's a good project, and since you won't have much left to buy materials it will turn into a scavenger hunt for flat, firm surfaces and supports. The table and fence are easy to upgrade when you have a new budget for better materials or stumble into them for free. The router and plate should be good for the long haul. Quote
wdwerker Posted April 20, 2016 Report Posted April 20, 2016 This ain't no cheap hobby by any stretch of the imagination ! Freinds don't let Freinds buy cheap Crapsman.......... 1 Quote
TerryMcK Posted April 20, 2016 Report Posted April 20, 2016 You do need a 1/2" router for mounting in a table but I think your budget is a little on the low side. Don't buy cheap as you will buy twice. Craiglist or eBay might get you a pre-used one. 1 Quote
wtnhighlander Posted April 20, 2016 Report Posted April 20, 2016 Personally, I would sink money into the router first. A functional, if plain, table can be made by bolting it to a piece of plywood. A 2x4 and some clamps make a usable fence. You can upgrade the table in increments, customizing it to your needs as you go. The router is an up -front expense. Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 51 minutes ago, wtnhighlander said: Personally, I would sink money into the router first. A functional, if plain, table can be made by bolting it to a piece of plywood. A 2x4 and some clamps make a usable fence. You can upgrade the table in increments, customizing it to your needs as you go. The router is an up -front expense. It's a fair point but, I'd take it a step further.. Eventually, you're going to need a router in the table and at least one for other uses. This is especially true if you plan on having a lift in your router table. Quote
collinb Posted April 20, 2016 Report Posted April 20, 2016 51 minutes ago, wtnhighlander said: .... A 2x4 and some clamps make a usable fence. ... Now I don't feel so alone. Just took a couple little clamps to hold it in place. Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 Just now, collinb said: Now I don't feel so alone. Just took a couple little clamps to hold it in place. That's twine, not clamps Collin Quote
collinb Posted April 20, 2016 Report Posted April 20, 2016 Now I don't feel so alone. Just took a couple little clamps to hold it in place. That's twine, not clamps Collin The only question in my mind was how long it would take ... Not very. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 1 minute ago, collinb said: The only question in my mind was how long it would take ... Not very. Sent from my MotoE2(4G-LTE) using Tapatalk Sorry Collin, was too easy to pass up.. All in good fun.. My apologies to the OP for the brief high jack.. 1 Quote
bleedinblue Posted April 20, 2016 Report Posted April 20, 2016 8 hours ago, wdwerker said: This ain't no cheap hobby by any stretch of the imagination ! Freinds don't let Freinds buy cheap Crapsman.......... Can't disagree too much...but the man gave a budget and I told him what he can get for that budget. At least I didn't link him to HF! Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 1 minute ago, bleedinblue said: Can't disagree too much...but the man gave a budget and I told him what he can get for that budget. At least I didn't link him to HF! At that budget, it's not much of a step up.. The hardest thing about getting going in this hobby is that people only have so much money and there's so many needed/wanted tools out there.. In another current thread, the discussion is over a vacuum that's triple this budget.. All in perspective I suppose. Quote
SmithCreek Posted April 20, 2016 Author Report Posted April 20, 2016 22 hours ago, midtnwoodworker said: This is not a bad unit for the price you are wanting, but does not come with a router. http://www.amazon.com/Bosch-RA1171-Cabinet-Style-Router/dp/B000H14DLY/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1461095339&sr=1-2&keywords=router+table I would personally build my own router table, and you can do that for well under your budget. Then you could buy a decent router with the money left over. http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1461095387&sr=1-1&keywords=bosch+router I should have been more clear, past head injuries are showing, I am mainly interested in the table at this point but I like the idea of making one but was unsure of how to deal with the fence. I should make it public knowledge that I don't believe that I will ever gain enough skill to do furniture grade work, wood working doesn't come naturally to me its just something I found by accident that I enjoy doing, I get a special thrill from the appearance of a pile of saw dust and most especially wood flour. I have read some good things from folks about the skil table and was thinking of buying something like that and improving on it as I learn about it. I fully understand the buy once cry once theory, none of my hobbies have been cheap and I do have some minor regrets over the Ryobi portable table saw I bought thinking it was my wifes and would get used once a month or less to make a few cuts but trying to learn to use what I bought for her I fell in love. it is humbling ( which is a good thing, we all need to be humbled from time to time ) to be closer to 60 than 50 and admit ignorance but here I am, I admit it, I need help. thanks for the good info, it is much appreciated and looked forward to. thanks. creek 23 hours ago, midtnwoodworker said: This is not a bad unit for the price you are wanting, but does not come with a router. http://www.amazon.com/Bosch-RA1171-Cabinet-Style-Router/dp/B000H14DLY/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1461095339&sr=1-2&keywords=router+table I would personally build my own router table, and you can do that for well under your budget. Then you could buy a decent router with the money left over. http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1461095387&sr=1-1&keywords=bosch+router checked out the links you posted and that is not to bad price wise and I like the idea of the 14 and 1/2 collets because I live in an EXTREMELY RURAL AREA, and bit selection wont be great if I needed to replace or buy a bit. I am going to research building a table to see if it is something I want to take on right now. thanks. creek Quote
rodger. Posted April 20, 2016 Report Posted April 20, 2016 A festool router and table is about 200 bucks, right? Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 45 minutes ago, bleedinblue said: Give or take.........yup. Give or take a zero.. Quote
wtnhighlander Posted April 20, 2016 Report Posted April 20, 2016 Personally, I would sink money into the router first. A functional, if plain, table can be made by bolting it to a piece of plywood. A 2x4 and some clamps make a usable fence. You can upgrade the table in increments, customizing it to your needs as you go. The router is an up -front expense. It's a fair point but, I'd take it a step further.. Eventually, you're going to need a router in the table and at least one for other uses. This is especially true if you plan on having a lift in your router table. Agreed! Swapping routers is much easier than swapping bits. That's why I have 5 (so far...). Quote
..Kev Posted April 20, 2016 Report Posted April 20, 2016 4 hours ago, SmithCreek said: I should have been more clear, past head injuries are showing, I am mainly interested in the table at this point but I like the idea of making one but was unsure of how to deal with the fence. I should make it public knowledge that I don't believe that I will ever gain enough skill to do furniture grade work, wood working doesn't come naturally to me its just something I found by accident that I enjoy doing, I get a special thrill from the appearance of a pile of saw dust and most especially wood flour. So, if the table was the most important part, you could probably build and be in your price range. There's a ton of plans and youtube videos out there to build a router table. It is important that you decide on a lift before you do the build. The lift will be above and beyond your budget but, you'll need to make that decision before you build. Quote
bob493 Posted April 21, 2016 Report Posted April 21, 2016 Heres how i built mine http://www.lowes.com/pd_599569-1110-011350010494588-60_2z8vm__?productId=50240961&Ns=p_product_price|0&pl=1&Ntt=counter+top+laminate 25$ http://www.lowes.com/pd_337922-353-1830_0__?productId=3364116 (I got mine for 79$ on sale iirc, but still in the budget. NO, its not a triton router, but for a hobbyist it works well, has plenty of power, and has 1/4 and 1/2" collets, though not quick adjusts) Has good reviews. 109$ 2 of these http://www.lowes.com/pd_432480-42597-WF204TOPCHC10___?productId=4082896&pl=1&Ntt=2x4 3.32$ x 2 -> 6.64$ A pack of 2.5" screws for 7-10$ 3 machine screws and nuts to mount the router 3$ two 1/2" toggle bolts and wing nuts 4$ 4 brackets and small pack of 1/2" - 1" screws ~7$ Melamine panel for fencing (cut it in half, its long enough) http://www.lowes.com/ProductDisplay?partNumber=107655-315-1863235&langId=-1&storeId=10151&productId=4264331&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1 Couple more nuts and bolts, 5$ Total : ~170, not including taxes, roughly 180 with a 6% sales tax. Now, while I can condone buying a somewhat cheaper router, I must implore you to get decent bits. Those can be extremely pricey, but they are typically well worth the money. I would take my skil router with a high quality bit over a triton router with a cheap bit any day of the week. 2 Quote
Jim DaddyO Posted April 21, 2016 Report Posted April 21, 2016 What I plan is to get a Veritas base plate for my router. http://www.leevalley.com/en/Wood/page.aspx?p=41776&cat=1,43000,51208&ap=1 They will ship it to you. Then cut a hole in the extension for the table saw and use use it's fence (with a home made attachment). Or, if you don't have a table saw you could go as cheap as a piece of plywood across a couple of saw horses. The beauty of this is that you don't need to take the base plate off to use it hand held. The router installs in the table from below (no fussing with the cord) and it is inexpensive. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.