kcfandjc Posted January 2, 2011 Report Posted January 2, 2011 Hello all - This is my first post here, but I have been reading off and on for a while. I am just getting into woodworking, and I am needing some help making a decision about what table saw to buy. Here are the requirements... Total cost (including tax/shipping) of less than $1000 Runs on 110V Prefer hybrid type I had pretty much decided on the Grizzly G0715P, but when I got ready to order it yesterday the sale price was gone, so now I am reevaluating. http://www.grizzly.com/products/10-Hybrid-Tablesaw-with-Riving-Knife-Polar-Bear-Series/G0715P Any help that you all can provide would be greatly appreciated! Quote
PaulMarcel Posted January 2, 2011 Report Posted January 2, 2011 Well, I have no knowledge of that Grizzly, but if the sale price just expired yesterday, give Grizzly a call. Explain you didn't realize the sale ended Dec 31 and thought it would go to Sunday or whatever. Considering what I've heard of their customer service, I'd bet they'd work something out. Quote
jgfore Posted January 2, 2011 Report Posted January 2, 2011 I do not know where you live, but in my area, Craigslist is the way to purchase everything. I have bought a Ridgid table saw, Powermatic 6" Jointer and a Powermatic Dust Collector for all under a $1000.00. I have a Ridgid TS and it works really good for me, however if I could do it again, I would have searched for a Delta or Powermatic (between the two, I would choose Powermatic). I have seen these brands on craigslist for around the $1000.00 range. I would not hesitate to purchase a JET either, but I have heard some concerns from others about their Customer Service. I have a Grizzly band saw, and I really like their products. They will do anything that the more expenssive brands will do, but the set ups are usually a little more aggrivating. Enough of my ranting. Check out Craigslist (especially the surrounding big city areas). My 2 cents. Jeff F Quote
knotscott Posted January 2, 2011 Report Posted January 2, 2011 The Griz looks like a solid choice to me, even at regular price....great fence, full enclosure, hybrid format, riving knife, cast iron wings, etc. The Steel City 35990Chas an open splayed leg enclsoure, but has cabinet mounted trunnions that are easier to reach and aligne, hybrid format, riving knife, cast iron wings, and built in wheels. $600 shipped from Amazon. The fence appears to be functional, but not at the level of the Griz or Cman fence...at that price, you could sell the stock fence and replace it with a good Delta T2 fence (~ $150) for a total out pocket upgrade for ~ $100...so ~ $700 when all is said and done, but you might find that the stock fence is fine. I'd also look into the Craftsman 22116 (made by Steel City/Orion)....great fence, full enclosure, hybrid format, riving knife, granite top. Regular price is a bit high, but it goes on sale in the low $700s occasionally. Quote
ssrt3 Posted January 2, 2011 Report Posted January 2, 2011 I'd also look into the Craftsman 22116 (made by Steel City/Orion)....great fence, full enclosure, hybrid format, riving knife, granite top. Regular price is a bit high, but it goes on sale in the low $700s occasionally. i just bought the craftsman 22116 i got it for 711.62+tax great deal and its smooth as glass. good saw i tried the nickel test passed. id say i do like the saw, im going to keep it for a few years then upgrade to a sawstop.ou just have to catch the saw on sale at sears. Quote
jmaichel Posted January 2, 2011 Report Posted January 2, 2011 The difference between the sale price and the regular price for the grizzly is only $7 ($859 shipped) that leaves enough left over for a decent blade and a mobile base. From what I have read the 0715P has gotten great views from many Lumber Jocks users, although those reviews should be taken with a grain of salt but its still better than a bad review. Check out this review on LJ My link Not sure if you have considered your current electrical constraints. This saw runs on 110v but I believe that it puts out 16 amps and requires a 20 amp breaker. Good luck. I don't own a table so take what I say with "grain of salt" Quote
knotscott Posted January 2, 2011 Report Posted January 2, 2011 i just bought the craftsman 22116 i got it for 711.62+tax great deal and its smooth as glass. good saw i tried the nickel test passed. id say i do like the saw, im going to keep it for a few years then upgrade to a sawstop.ou just have to catch the saw on sale at sears. I forgot to add that the 22116 also has the big yoke style cabinet mounted trunnions. Quote
Mister Pants Posted January 2, 2011 Report Posted January 2, 2011 Not sure about the sale price, but it looks like the baby version of my tablesaw (the G0691). If it's anywhere similar in quality, and I expect it is as Grizzly makes good quality no-frills tools, it's a very good saw, I know I'm very happy with mine. The riving knife is also very easy to change (no nuts, just a little slide you pull to unlock it). Looks like a good saw for the money, even off sale. Oh as for a mini-review (based on the G0691). Pros: tables dead flat alignment of the blade to the miters was off by less than 0.001 (in short bang on) shipped fence alignment was 0.004 out (away from the blade at the back) shipped setup it passed both a nickel and penny test (i.e. starting up nickel and penny stood on their edge on a wing and didn't fall) tilt stops are bang on. riving knife is ridiculously easy to change nice and powerful. I haven't noticed a slowdown cutting through anything yet including not completely dry osage. Cons:I have the 52" wing so probably not applicable to you, it had a dip in the center legs on the end of the 52" are a little on the light side for my taste dust collection isn't the greatest. It has no blade shroud which doesn't help but it just means there's more in the bottom of the cabinet The cabinet door isn't exactly level (not sure if this is endemic to most cabinet saws as it was my first), you have to slightly lift it to screw the knob back in Oh and it needs to be completely rust inhibited cause I sweat too much in the summer! . Quote
Godet Posted January 2, 2011 Report Posted January 2, 2011 I've had the Jet 10 inch Pro Shop for about a year and I have been really satisfied. Set up was not bad and it has been reliably square ever since; the fence is smooth and accurate. Fortunately, I haven't had to use customer service for the saw, but for the other Jet/Powermatic tools I've needed to call about, customer service/technical support was outstanding. I use the saw primarily for ripping...keep an eye out on Amazon--it is currently listed for about $900, but I picked mine up for under 800. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.