TerryMcK Posted January 8, 2017 Report Posted January 8, 2017 Yes I too think you nailed that one. 1 Quote
doyle007 Posted January 11, 2017 Report Posted January 11, 2017 Like sjk mentioned, the recent issue of Popular Woodworking has an article on the spring joint. They mention that the gap should be big enough to just slide a piece of copy paper through it, or at most a business card. I am going to be using this method to build an alaia, which is basically a solid wooden surfboard. I think that the spring joint will work well for this scenario. If not, well then it won't be much of an issue, as I have broken plenty of boards in the past. 1 Quote
Tony Wilkins Posted January 11, 2017 Report Posted January 11, 2017 30 minutes ago, doyle007 said: Like sjk mentioned, the recent issue of Popular Woodworking has an article on the spring joint. They mention that the gap should be big enough to just slide a piece of copy paper through it, or at most a business card. I am going to be using this method to build an alaia, which is basically a solid wooden surfboard. I think that the spring joint will work well for this scenario. If not, well then it won't be much of an issue, as I have broken plenty of boards in the past. I'll be eagerly waiting to see that project! Quote
Bulldog Posted February 2, 2017 Report Posted February 2, 2017 Looks like you already figured the spring joint out, but here is a link to a new FWW video that may be beneficial. It's probably behind a paywall. http://www.finewoodworking.com/2017/01/24/ep-1-panel-glue-ups-using-spring-joint Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.