Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tack Trunks, but an outfeed table first?

Featured Replies

  • Popular Post

Well business takes me away from my shop for the winter, so I'm left with planning my next project or two for when I get home. The silver lining is I've left the winter of Indiana behind for 4 months of Florida! [emoji267]☀️️[emoji108]

I've attached a couple pictures of my last two projects. I build boxes that horse people can store their equipment in. They're very simple next to most of the other projects I see here, but I've enjoyed making them, and hopefully the work will earn enough money to buy some more powerful tools! And I can make them without a jointer! I'll give you one guess as to what tool will be strongly considered to be my first big purchase!

Picture 1 is of a light weight version with lowes birch plywood faces and pine trim. Pictures 2 & 3 are of a heavier duty one with the same birch plywood, but oak trim and a sliding tray insert.

38d6318a42fac43f05329fb86c0d22c0.jpg6ba5eb27ee27947c7f40b7ef98dd4483.jpg6afc4ee77723b5aeaf89e83063402d54.jpg

I have a stack of rough cut maple from a tree that fell at my parents' house that I'm planning to use as trim for the next few I make. I've been using GF gel stain, and had very good luck matching the stain between the birch plywood and oak trim.

My first question is: will the maple be as easy to match to the way the birch takes the stain, or should I consider finding some maple veneered plywood? 4x8 Birch plywood costs $48 at lowes, while maple is $110 at the closest lumber yard.

My last two boxes were very slightly out of square once I assembled them. I built them on a table made out of a 3/4" sheet of MDF laid across two saw horses. I blame at least most of the crookedness on not having a flat surface for assembly. I'm thinking I need to build some sort of flat assembly table. If I'm going to do that, I might as well take the time to make it a multifunction out feed table for my little jobsite table saw, with a wing for a router insert. I've had to shuffle the table saw, the router table and worktable back and forth for all of my projects, so i think if I can combine all three parts to share the same space more efficiently, my life will be WAY easier.

I'm embarrassed to admit how much cleanup is going to have to happen to make room for the table. My shop is on my in-law's property, and it has been accumulating stuff for much longer than I've been around. The good news is it's not a shared space, and I can do whatever I want to it!

So here's the revised order:

1) CLEANUP!!!

2) Assembly table

3) Back to work on the profitable items

Somewhere in there I hope to upgrade my dust collection from a shop vac with a dust deputy to a more dedicated system.

Anyway, I'm still two and a half months from being able to get back to it, but it'll give me plenty of time to learn sketchup and plan things out better than I've done in the past!

I'll post pictures as I go, and I apologize to and thank you all for the questions and answers that I'm sure will crop up along the way!

Sent from my iPhone using Tapatalk

Nice Tack trunks... I almost built one and then my daughter decided that she should concentrate on college rather than riding horses... Her idea not mine :)  Still have the mahogany plywood that I was going to use... I think they may become hope chests :)

 

  • Author
Nice work on the trunks, Seth. If you want to up your game with jobsite saw while you save for bigger & better tools, check out the Paulk workbench, it might fulfill your needs for assembly and outfeed surfaces.

How do you think this bench compares with the torsion box that Marc did a video of? I love how the Paulk bench gets both a small TS and the router into one piece of furniture. I think Marc's may be cheaper to build once it's all said and done...

Sent from my iPhone using Tapatalk

Home Depot in my area sells 3/4 maple plywood for same as birch $50.

Sent from my SM-G900V using Tapatalk

  • Author
Home Depot in my area sells 3/4 maple plywood for same as birch $50.

Sent from my SM-G900V using Tapatalk

Ah yes, so does mine! We have a lowes credit card and get 5% off with it, so I've fallen out of the habit of even checking HD.

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.