Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cajon repair

Featured Replies

  • Popular Post

This isn't much of a project but I like helping people with their projects so I figured I'd do a short post on this -

I got a text the other day from one of the student leaders at church asking if I could repair the Cajon they use in the student ministry area.  It seems they had played it so much that the veneer had begun to peel off.  I pointed out that the board I would use would not have that wild figure and the were ok with that.  So I picked it up Sunday after church and Monday went to Michaels to get a piece of 1/8" Baltic Birch ply, same piece I used when I built my Cajon a couple of years ago.  Sandy had a coupon so the board only cost about $2.50! 

It was pretty easy to transfer the holes and cut to size, sand, spray some sealer and then a good heavy gloss coat of Nitrocellulose.  Between the sealer and gloss I figured it would be ok to 'personalize' it a bit for them so I engraved Airline Baptist Students on the soundboard. 

Also, I noticed an Allen wrench rattling around inside the box and found that it is for adjusting the tension on the snare wires.  It must have had a holder at one point but that was gone.  So I made them one out of Walnut, embedded a rare earth magnet inside, and glued it to the back support piece.  Now the wrench is contained but very easy to remove.  And it stays put even if you turn the Cajon upside down and bang it around (I had to try, what can I say...).

Here are the photos of before, after, engraving, and Walnut holder -
001%20-%20Old%20Cajon%20soundboard_zpsid

002%20-%20New%20Cajon%20soundboard_zpsel

003%20-%20Engraved_zpsc9zhpruj.jpg

004%20-%20Allen%20wrench%20holder%20Waln

Enjoy!
David

Nice work. I had a go at making a few of these but never worked out a snare system. Looks good!

  • Author

I built one a few years ago and this is the snare I used, adjustable by the knob and can be locked by the other knob (partially hidden in the photo) -

[21%20-%20Cajon%20-%20Snares%20retracted_[/

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.