rodger. Posted April 13, 2017 Report Share Posted April 13, 2017 Looking to make some 5/8" drawers from solid wood (maple) - both front and sides. Looking at these bits for drawer lock, but one is for 1/4-1/2", and the other is 11/16-3/4". Which would be appropriate, if either? http://www.leevalley.com/en/wood/page.aspx?p=30107&cat=1,46168,69435,46174 or http://www.leevalley.com/en/wood/page.aspx?p=45097&cat=1,46168,69435,46174 Quote Link to comment Share on other sites More sharing options...
gee-dub Posted April 13, 2017 Report Share Posted April 13, 2017 I find the second one you show most useful. It works on 1/2" to 3/4" fine for me. This is 3/4" stock: This is 1/2" BB ply" 1 Quote Link to comment Share on other sites More sharing options...
rodger. Posted April 13, 2017 Author Report Share Posted April 13, 2017 Thanks G-Dub. Do you have the small lock bit from lee valley? If that is what you used in your above photos, I'll just get it. Quote Link to comment Share on other sites More sharing options...
gee-dub Posted April 14, 2017 Report Share Posted April 14, 2017 I have Whiteside 3347; 1/2" SH X 1/2" CL X 1" LD X 2-1/8" OAL . P.s. I also fixed some spelling errors in my other post. Quote Link to comment Share on other sites More sharing options...
CandorLush Posted April 14, 2017 Report Share Posted April 14, 2017 Perfect timing, it reminded me I have one of the second ones in my drawer and have some 1/2 BB ply drawers to make up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.