BobInAustin Posted May 8, 2017 Report Posted May 8, 2017 I didn't know these existed until someone on the Wood Whisperer Facebook group posted about them. Bosch LS010 (there are others) is a laser that replaces the factory washer on the saw. It creates a laser line exactly where the cut will be. https://www.amazon.com/gp/product/B004GH6YYO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Very cool upgrade. Quote
Eric. Posted May 8, 2017 Report Posted May 8, 2017 I love lasers for semi-rough cutting. But man, when it comes down to the wire on a critical part, I just don't trust them even if they're dialed in. It's like the tape on my table saw rail...no matter how many times I confirm that it IS perfectly calibrated, I still pull out the tape to make sure when I'm doing something that matters. Guess I'm like Will Smith in I, Robot...just can't get over those AI trust issues. 1 Quote
Woodenskye Posted May 8, 2017 Report Posted May 8, 2017 I tried one of those on my old miter saw, didn't stay calibrated, and always having to fiddle with it made it a waste in my opinion. Quote
Jfitz Posted May 8, 2017 Report Posted May 8, 2017 I have 2 different ones for my CMS (a Dewalt). The first was the dewalt-made laser. It actually fit integrated into the saw - nice concept. I was never able to get it calibrated properly though so I tossed it. The next was a washer-based one like the one you show. It's still on my saw - like Eric, I used it for rough cutting when precision didn't matter. It's was handy, at times. I have since started using a sacrificial fence secured to the CMS fence - and the kerf in that backer board gives me a far better idea of where the cut will be. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.