Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Carter bandsaw guides on a cheap saw

Featured Replies

Obviously I haven't had much shop time lately.  I can tell because I have tool and shop upgrade ADHD...one minute I'm thinking about if I should build a new work bench or a new outfield table first, then I'm about to pull the trigger on some new hand tools, then I remember that I'm trying to get better performance out of my bandsaw.

My saw is the bigger, newer Craftsman, the 14" BAS350.  It was sold as a bare-bones tool, no light, no fence, etc.  It does have bearing guides, but I gotta believe they're bottom barrel guides.  The saw has always done OK for what I need it for, mainly ripping rough stock and cutting the occasional curves...I feel the saw is under-utilized and some upgrades may make it more useful.  I will need to do some re-sawing this summer too.

Are the Carter guides, which run around $160 for this saw, worth it?  That's a third of what I paid for the saw it's self new.  If it won't be a drastic difference, it wouldn't be worth it to me. 

The stock guides on my 17" Grizzly basically froze up, so I replaced them with Carter's as a last-ditch effort to salvage a saw that I can barely tune to acceptable performance.  They helped...but the saw still sucks.  Guides can only do so much...there's still a lot of other crappy parts on a crappy saw that can give you trouble.  I'm gonna ride the bear turd as far as it takes me, but an upgrade is definitely in my future at some point, Carter's or no Carter's.

If you want clean cuts with a bandsaw, it's almost all about tensioning, and the size of the blade.  I'm sure I could resaw on the 24" Centauro just fine without any guides at all, only the feed rate would have to be slower.  It can tension the blade higher with the larger wheels because a thicker blade can turn around those wheels.  Since larger wheels can put more tension on a thicker blade, the larger radius also allows the saw to spin the wheels faster, so the larger the saw, the higher the blade speed, and the faster and cleaner the cut.  

Better guides can allow you to put a finer tune on any saw, but you're still limited by all the other physics involved, so you can't get but so much out of a given sized saw.

In short, I wouldn't spend the money on that saw.

  • Author

Unless someone chimes in with personal experience with the Craftsman or the Rikon twin, I think that tells me everything I need to know.  I'll stick with this saw as it sits until upgrade.

I don't know anything about the 14", but I have a Craftsman 12", and it's a decent little saw for its size.  I don't think any kind of upgrade would be worth the trouble to bolt it on, much less put more dollars into it.

I had a Craftsman 14" for a long time (a 1970's model). I reduced the vibration to some degree through setup, correct blade tensioning, and installing a segmented belt on the motor pulley.

Carter has a great booklet on saw setup for resawing which, when the steps are followed as described, really makes a differences. It improved performance of even my Craftsman; probably to its limits.

I took a class from Michael Fortune ( a well-known professional Canadian furniture maker) and he told us that he still uses a Ridgid bandsaw for some of his resawing work. He insisted that bandsaw performance was all setup and technique. You probably can find some articles online by him which talk about technique and setup along with the Carter booklet. Some of his articles appear in Fine Woodworking.

Having said all of this, there were some definite limits with the Craftsman. I never was able to get rid of all the vibration. And, while my resawing results improved significantly, I never got the results I'm now getting with a new Rikon 14" I got a couple of years ago. It's just a better saw.

I think that was the right decision. 

And if it is already under utilized, I doubt it is the stock guides fault alone. May as well throw that money at a tool you use all the time and want to pimp out

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.