difalkner Posted June 5, 2017 Report Posted June 5, 2017 This is an award I was asked to build and paint. I don't have a good place to paint, no spray booth, so that means rattle can outside. I don't mind spraying clear lacquer in my shop but I don't want paint overspray on everything. Honestly, I don't want to do any of this but they needed it quickly and I agreed - ugh! The flames are painted with an air brush so that was done in the shop under better conditions but painting a Pine board in rattle can black gloss isn't easy. I started to run a long hose outside and use my HVLP gun but thought I'd give this a shot. It came out ok if you don't look very closely. They'll cover the entire front with brass 1" x 3" name plates of the winners of the contest this represents anyway so the black not being perfect shouldn't matter. The piece is 56" tall and 12" wide. The sample sketch as provided - Finished piece - Enjoy! David 2 Quote
lewisc Posted June 6, 2017 Report Posted June 6, 2017 Should've used... https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRjQdB7Pkt0bt5yEOFcS3VlvcRCO3J7twkrQXgHB4xSehGTyUq2yLLiDmq6 Quote
difalkner Posted June 6, 2017 Author Report Posted June 6, 2017 Flame Maple for the flames? Makes sense; I suggested veneer early on but this is the look they wanted. David Quote
lewisc Posted June 6, 2017 Report Posted June 6, 2017 2 minutes ago, difalkner said: Flame Maple for the flames? Makes sense; I suggested veneer early on but this is the look they wanted. David Sounded a bit funnier in my head. 1 Quote
difalkner Posted June 6, 2017 Author Report Posted June 6, 2017 It's ok, I laughed when I read it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.