lewisc Posted June 6, 2017 Report Posted June 6, 2017 I finished my new computer desk today. The base is made from welded steel and the top from some water damaged, quarter sawn Tasmanian Oak that I found. It's the biggest top I've done so far at 1600x600mm (63"x23.5"). Finished with 5 coats satin wipe on poly. I'm working my way up to a dining table so it was some good practice for gluing up this top. Next thing for it is to work out some cable management. 1 Quote
Denette Posted June 6, 2017 Report Posted June 6, 2017 I've never seen that species before - very pretty! Nice work! I'm curious, how did you fasten the top to the base? Quote
lewisc Posted June 6, 2017 Author Report Posted June 6, 2017 It's commonly used for floorboards over here. There are a few timbers that are similar but get given a different name (Victorian ash, tassie oak, mountain ash, messmate). I really don't know what the difference is. The biggest frustration I have with it is it's splintery. And crosscutting with machines will usually have some chipping. For joining the top, I cut some angle steel and welded it flush with the top. I drilled a few holes next to each other and filed them so they're elongated( I think that's the word). With a few screws driven up into the top it's sturdy. I'll keep an eye on movement to so how it goes though. They might need to be made a bit bigger. I just realised I missed a bit with the spray paint. Thankfully it's underneath. Quote
Denette Posted June 6, 2017 Report Posted June 6, 2017 Nice! What kind of finish is it? And you said "over here" - Australia? Quote
lewisc Posted June 6, 2017 Author Report Posted June 6, 2017 http://www.feastwatson.com.au/consumer/products/interior/product-details/1512 The closest thing I could find to ARS over here in Australia. I'll have a go at mixing my own once this runs out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.