Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need advice on repairing crumbling particle board under vaneer

Featured Replies

Hi all, I have an old sideboard, probably walnut, and I'm refinishing the top. The particle board is swollen along the back edge and soft in a few areas. Not the entire length but there are a few places where I can press on the veneer and the particle board gives. In the past I've used two part Epoxy Putty Sticks to fill below veneer, but it tends to not always hold and will pull off taking more of the particle board with it. I'm afraid to chip out more of the particle board here but it's crumbly and I could easily dig out a lot more. Has anyone tried Super Glue to stabilize the particle board? Any suggestions would be appreciated.

IMG_2288.JPG

IMG_2289.JPG

  • Popular Post

I'd replace the entire top. If not possible, consider removing 1 inch from the edges and edge banding with solid wood.

2 minutes ago, Immortan D said:

I'd replace the entire top. If not possible, consider removing 1 inch from the edges and edge banding with solid wood.

I second this.  Even if you are able to "stabilize" the partical board, you will still be missing the veneer.  My guess is that it got wet, and you may find replacing best option depending on damage you can't see.  If you replace don't use particle board.

  • Author

I would love to edge band the back side but not sure where to begin. Could I cut the back edge off with an Exact-o knife?

 

2 minutes ago, Tonya said:

I would love to edge band the back side but not sure where to begin. Could I cut the back edge off with an Exact-o knife?

 

No. You will need to do some woodworking or find someone who can do it for you.

5 hours ago, Tonya said:

I would love to edge band the back side but not sure where to begin. Could I cut the back edge off with an Exact-o knife?

 

This repair would require some experience with wood working. Though not difficult, it would take some tools and know-how to get it to look professional.

Most would rip off the bad piece with a table saw, followed by edge banding with a piece of solid walnut. It would look best to do all 4 sides, and miter the corners.

Or, build a new top, if your budget allows.

Let us know what experience you have, and we can help further.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.