Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's your/your company's policy on consumables?

Featured Replies

So, since our company's now part of a large congomerate, and we are not meeting our "target" income to feed the beast, it hath been decreed that almost every service ticket will be dinged with a $3 (min) misc charge, either electrical, plumbing, whatever.

If you replace that spade terminal on a switch, it's $3. Period. Use a single wire nut? $3. Or more, whatever you think you can get away with.

In the past, our terminals and wire nuts, metal screws, and sundry had individual part numbers assigned. What a pain it was to account for each sheet metal screw, wire nut, wire tie on a ticket, by part number.

So, wanting to make *my* life a little easier, I had always bought my own supply of misc parts, like wire nuts, self tappers, and various stainless screws. I never asked the company to cover the costs. Never charged a customer for a wire nut or screw here and there. It was no great expense on my part.

Now we are no longer allowed to do this. Zere Vill be der charges!

This is originating from upper levels of corporatedom, and I'm hearing several location managers got a giant earful, and were commanded to make sure we followed through.

In any event, what are y'all doing on a day-to-day basis with things like this?

More: kích thước máy hút mùi nhà bếp, cách lắp đặt máy hút mùi

Yeah probably not a whole lot of wisdom to be gleaned on that topic in this forum.  The vast majority of us are hobbyists or one-man small pro shops.  Our consumables are paid for with change dug out of the couch cushions. LOL

I hate penny pinching accountants !   I learned that the screws included with most hardware these days are too soft and strip out easily. So I keep a range of sizes on hand & use my own screws which increases productivity. If it's under 30 screws I don't worry about it. Over that I charge for a box of screws and it all works out in the end. 

12 hours ago, RichardA said:

And this pertains to woodworking how?

Hence, the off topic forum.  A shop is a shop, whether you are woodworking or metal working or producing carp parts, most of us have somebody else holding the purse strings, be it an accountant or a spouse. 

 

I work in the complete opposite of a wood shop.  Where I work, if there is a problem, the solution is to throw money at it, and then bill then customer.  Of course, when the customer is worth 9+ figures, they rarely notice the waste. 

Recently, one of the guys built a mock up for architect approval of a medicine cabinet.  The actual doors are supposed to be 24"x24"x 1.5" marble, with a mirror mounted to that.  We were just using 1.5" MDF for the mockup, but using the called for hinges.  These suckers, the hinges, cost $600 each (or so I'm told), and look like they could easily replace the landing gear on a 747.  But somehow, the guy making the mock up managed to snap one off, broke in the middle.   Instead of finding the root cause of the break (idiot user), they decided to find a even more heavy duty hinge.  For them, it's easier to fix the solution, than to prevent the cause.   And of course, when we do build the final product, we'll use all new hinges, and toss the mock up ones. 

We are not allowed, absolutely forbidden, to return any hardware to a storage bin.  If I grab a handful of 1 1/4" screws to build a cabinet carcass, any leftovers must go in the recycling bin.  Even if I offer my first born as collateral, they will not accept hardware from the floor back into the storage bins or store room.  I know this small pile is 1 1/4", and there's no way any other size got into that pile, I have to throw the extras away.  Of course extras usually end up in guys pockets and taken home to build their own supply.  They have this policy to prevent a screw or nail accidentally blowing through a show side.  

I was adding trim to a door yesterday, and another guy was putting crown molding on the doorway.  Due to equipment breakdowns, we were down to one pin nailer.  I was using 3/4", he was using 1 1/4".  Technically, every time we traded the gun back and forth and reloaded it, we were to dispose of the pins we took out of the gun, and then grab a new set of pins for ever time we switched.    Of course we didn't, since that's ridiculous, we just kept the piles in front of each other.  Oh, and the contract required stainless pins and screws, so these weren't home depot bulk buys, they were all special order hardware.

Our generic blocking material, or base construction lumber, is whatever our mill has left over from the cutoffs from the solids from a project.  So right now we are building shipping crates with 1.5" x 14' wlanut, alder, mahogany, and the purest straight grain maple I've ever seen.  I swear a good bit of it is quarter sawn.  Of course, the lengths get cut down to what ever each project requires, and the "waste" gets tossed.  Which again means it ends up in the back of somebody's car.   One guy this summer had a bonfire with nothing but mahogany.  Why is walnut so expensive you ask?  Sorry guys, my bad.  Don't even get me started on the veneering department. 

So yeah, I've worked in shops where everything is accounted for.  If I wanted a new pairs of safety gloves, I had to return the ones I got previously.  But this place is ridiculous in the opposite direction. 

I used to  run 4 micropin guns but they were cheap ones and we were shooting thousands of pins a job. Jams became a nightmare. I got a second Grex gun and label it w masking tape as to what size pin was loaded. Grex pin guns are pricey but almost zero jams makes it worth the $$. Grex pins are high quality too, and they have stainless ones ! Richielu carries Grex pins.

That's what we were using, Grex.  3 out of the 4 were KIA.  They're nice guns, but even the best tools can only take so much abuse.  

The Grex that shoots 2" pins is great but not friendly to abuse. I've learned that off brand 23 gauge micropins are not worth the savings. If changing sizes toss any strip under 1/3 they cause more problems than they are worth. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.