man of wood Posted February 4, 2011 Report Posted February 4, 2011 My saw blade angles to the right (same side as my fence). when cutting a 45 should I have my good piece under the blade or on top?? Quote
Ben H Posted February 4, 2011 Report Posted February 4, 2011 Elwood is correct. Never leave a loose piece of wood between the fence & blade. Thats a great way to get hurt. Be safe! Quote
JimB1 Posted February 4, 2011 Report Posted February 4, 2011 Any reason you can't put the fence on the left for those cuts? Here's what Marc has to say on it... http://thewoodwhisperer.com/fence-position-for-right-tilt-saw/ -Jim Quote
TheNehlsEnd Posted February 4, 2011 Report Posted February 4, 2011 I rip 45's from the right with the fence and crosscut 45's from the left with the miter gauge and the fence moved to the far right to keep pieces from binding and flinging like a projectile. Quote
man of wood Posted February 4, 2011 Author Report Posted February 4, 2011 Any reason you can't put the fence on the left for those cuts? Here's what Marc has to say on it... http://thewoodwhisperer.com/fence-position-for-right-tilt-saw/ -Jim yes, I do that..... now that the blade is now angled away from the fence, Do I have the good piece on the top or bottom?? Quote
Craig Posted February 4, 2011 Report Posted February 4, 2011 yes, I do that..... now that the blade is now angled away from the fence, Do I have the good piece on the top or bottom?? Sounds like you have a right tilt saw. Like others have said, move your fence to the left side of the blade for bevel cuts. Your good piece should be on top(left of the blade). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.