guitar10000 Posted March 30, 2011 Report Posted March 30, 2011 Hello , I recently bought this Jet JWL-1236 lathe used. On the motor end (as you can see in the picture) is a threaded hole. I can't find any documentation as to what this would be used for. I wanted to add a wheel to manually turn the project like I've seen on other model lathes. The manual really doesn't say much about it. I would also like to build a router attatchment that would be turned manually using 2 bearing blocks for the router runners and a ball screw to move the router. Maybe 2 gears , one on the ball screw end attatched to a gear on the threaded hole on the lathe. If anyone has any information on what the threaded hole is , or why its open , please let me know. Thanks Quote
alindsey Posted March 30, 2011 Report Posted March 30, 2011 Hello , I recently bought this Jet JWL-1236 lathe used. On the motor end (as you can see in the picture) is a threaded hole. I can't find any documentation as to what this would be used for. I wanted to add a wheel to manually turn the project like I've seen on other model lathes. The manual really doesn't say much about it. I would also like to build a router attatchment that would be turned manually using 2 bearing blocks for the router runners and a ball screw to move the router. Maybe 2 gears , one on the ball screw end attatched to a gear on the threaded hole on the lathe. If anyone has any information on what the threaded hole is , or why its open , please let me know. Thanks I think there should be a handwheel there, at least that's what's there on the floor model in my store. Quote
Dave H Posted March 30, 2011 Report Posted March 30, 2011 i don't have a jet lathe but on my grizzly thats where i insert the knock out tool for removeing the spur drive. Quote
guitar10000 Posted March 30, 2011 Author Report Posted March 30, 2011 Hello , Thanks for the reply. Here is the Diagram of the JWL-1236 Model I have. It shows nothing there. No wheel. Just open end with a threaded opening. Any idea?JWL-1236 Dia.pdf Quote
guitar10000 Posted March 30, 2011 Author Report Posted March 30, 2011 Yes I can insert the knock out pin. I am just wondering why it's threaded. I wanted to make a router attatchment to this lathe. Quote
Dave H Posted March 30, 2011 Report Posted March 30, 2011 i just looked at the jet manual and it shows a hand wheel http://content.wmhtoolgroup.com/manuals/708352_man.pdf page 11 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.