Recommended Posts

Posted

Howdy ya'll. I'm a 25-year old soon-to-be-father who enjoys playing out in my shop. It really is just a third of the garage that I walled off to contain my sawdust. Working on getting stuff setup and getting my feet wet in woodworking. My experience under the belt is mostly building shelves or tables using 2x4's held together with more screws than is needed and the occasional nailgun. I look forward to starting some projects to get my feet wet and eventually would like to hone my skills to be able to do some home furnishings.

Been listening to the podcast for awhile now, and have absorbed alot, just need to put it into practice. Stopped by a lumber mill on my way home from work this afternoon and was happy that they were actually open. Now I can venture outside the big-box store for my supplies.

Speaking of supplies, my shop currently consists of:

10" Craftsman radial arm saw

10" Black & Decker miter saw

10" Skillsaw Table Saw

Craftsman router

Delta Benchtop Disc & Belt sander (need to replace the drive belt on this guy)

Other smaller powered tools:

2x Circular saw (5.5" battery, 6.5" plug-in), 2x jigsaw, reciprocating saw, 2x battery powered drill, 1x battery powered driver, 2.5gall 2.5hp shop-vac (dust collection) air compressor (including 16 & 18 gauge nail guns)

Other tools:

misc general purpose hand saws, smorgasbord of 10" saw blades, drawer full of clamps, hand rasp, couple chisel sets, lots of screwdrivers, hammers, a few different drill bit kits, hole saw kit, multimeters, dado set, wrenches, other miscellaneous tools

Other borrowable tools (parents live across town, so I can borrow stuff for projects):

lathe

10" Ryobi surface planer

scroll saw

router table

Tools I want:

Band Saw

Drill press

Router table

Disc grinder

Replace the Radial Arm saw & miter saw with a single compound sliding miter saw.

Projects recently completed:

Built a half-door to the shop to server as an entryway and also function at the outfeed for the radial arm saw

Just finished building a dust collection box for the planer to port into the shop-vac.

Projects to work on:

Replace the 5 half-height, mismatched, stacked dressers currently holding all of my stuff (I'm a drawer guy, not a big fan of pegboard) with a wall of file boxes.

Floor-standing laptop table for my wife for use in the bed or chair.

Toys for the little one.

Setup a proper dust collection system rather than just plugging the shop-vac into the various tools.

Down the road, make built-ins for our library to replace the 9 Ikea Billy bookcases which currently do the job fairly well.

Hope that gives a little insight into where I'm at and where I'd like to go. I hope to be more active in these forums, as my nerd alter-ego has found online forums to be a great way to share the knowledge that I have, as well as learn something for myself (this site will fall mostly on the latter).

Posted

Hello USA

Welcome to WoodTalk Online , glad you join us here , there's a great group of guys and girls here . Sounds like your shop is ready go tool wise . Check out the web cams here too , you'll get some great live action and you can usually chat with members that are boardcasting to ask questions . It's another excellent way to help in your woodworking journey . Look forward to seeing some of your projects , we like pictures here. ;)

Regards

Jerry

Posted

Cool, thanks for the welcome. I'll have to check out the webcams. I finally got my bench cleaned off yesterday. First time since I put it in there a year ago. That's pretty sad.

Posted

AJ!!! no freakin way! i never thought i would run into you here! so you're addicted to woodworking also? sweet. who woulda known. post some pics of your shop. it sounds awesome. im currently working out of a spare second bedroom, so the only power tool i can use is a porter cable router.

so awesome to run into you.

ryan (yes, from peru)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined