Recommended Posts

Posted

Hello!

I am 16 years old and from Canada. While most of you are probably doubting my skills, I have already built 2 guitars, and have another 2 on the go. My shop is modest, and mostly from me or inherited from my father who owned a sawmill. I sure didn't pull these skills out of the grass, since my dad and mother (now seperated) came to Canada in the 90's and bought a mill and ran that for several years. MY mom also enjoys little projects like bowls and the like. My uncle from Germany (who visited 7 times in the last year!) has helped a lot too.

My shop is expanding, and most of it comes from Home Depot and Lee Valley. I currently have a drill press, a planer, a jig saw, a dremel, a mastercraft router, and am hopefully adding a bandsaw and new router to the mix. I have about 500$ worth of handtools already collected (rasps, files, knives, pliers, saws, drill bits,clamps etc.)

I love to build these instruments, and in the future will start to build acoustic instruments also.

Here are some pictures of my first two. The first one took 6 months on + off, and the second one (for my sisters boyfreind, made 500$!) has an inlay that I made pre-dremel and it took almost 8 hours to do!

First one. One piece Ash

35749_10150206013070475_609310474_13573668_6937256_n.jpg

75831_10150294902420475_609310474_15774427_2479795_n.jpg

67458_10150294903465475_609310474_15774448_4726935_n.jpg

Second one (almost exact copy)

DSC04892.jpg

180172_10150399237715475_609310474_17612783_7620710_n.jpg

184368_10150413380040475_609310474_17789164_3644040_n.jpg

189051_10150415697385475_609310474_17813793_1508530_n.jpg

190759_10150415699235475_609310474_17813813_3276645_n.jpg

Posted

Great looking pieces. Nice little shop setup too. What areas/skills are next on your list for improvement/practice?

I didn't post a picture of my workspace yet! :lol:

Heres my main work"bench". Its just a office desk that has been bolted to each other and is very sturdy.

68699_10150292343185475_609310474_15734047_5183030_n.jpg

And heres the workbench I got from my father, it was made in Germany, 1969.

183734_10150416824170475_609310474_17826462_553248_n.jpg

Many things are now in different places, it's usually changing if theres something not working.

I plan on improving template making, in terms of speed and quantity, hand shaping, neck building, and inlaying. I need to get myself a more precise dremel bit soon and a better base for it.

Posted

Nice work and welcome. You have a router from Can tire you may want to get a smaller one between the size of the master craft one and the dremel or a router table. You can build one of those yourself I am sure. This may help you with some of that kind of work. Love the old bench have you considered restoring it a little? It looks well made and well used.

Posted

Nice work and welcome. You have a router from Can tire you may want to get a smaller one between the size of the master craft one and the dremel or a router table. You can build one of those yourself I am sure. This may help you with some of that kind of work. Love the old bench have you considered restoring it a little? It looks well made and well used.

I'm planning on getting the Bosch one from stewmac, its 100$ and will work for me. I dont need a router table, since any endge rounding I prefer to do from the top, gives me more control about tearing out and the like. It hasn't even entered my mind, any ideas? It was from my dad.

PS: Is there a control panel or something on this site to see if people posted in your threads? I just can't find one....

Posted

I'm planning on getting the Bosch one from stewmac, its 100$ and will work for me. I dont need a router table, since any endge rounding I prefer to do from the top, gives me more control about tearing out and the like. It hasn't even entered my mind, any ideas? It was from my dad.

PS: Is there a control panel or something on this site to see if people posted in your threads? I just can't find one....

Nice work, welcome to the forum....if you want to know if anyone replies to your thread, go to the top and click on the 'watch thread' button...you'll get e-mail notifications.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined