Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Outdoor Finish

Featured Replies

I learned the hard way not to apply a finish to outdoor projects. I even used a marine finish, that were suppose hold up to the weather, but it didn't last a year. I think the mistake is going with a "film" finish. My wife really doesn't like the gray weathered look. So, I thought I would look into some penetrating oil finishes. I really like the outdoor furniture Tim Celeski makes. He talks about using a Brazilian Rosewood Oil finish on his outdoor furniture. He doesn't give a brand, but I did a Google search and found Penofin. They say they use Brazilian Rosewood Oil in their finishes. Has anyone used their products? Does their product help delay the graying of wood, that is left outdoors? I don't mind reapplying an oil finish each year, but redoing a "film" finish just isn't going happen anymore. FYI, I live near Seattle, Wa, so it is somewhat wet here.

Mike

What species are you going to use for the adirondack chair Mike? I'm using cedar and I was thinking I'd just use a conventional outdoor protection like a Thompson's Water Seal. It works great for my deck so I thought it would be fine for my chairs too. I'll probably have to reapply it each year to get the best UV protection.

  • Author

I might be going with Mahogany. Although, I think my hardwood supplier had Redwood at one time. I'm going to drop by there this weekend and see if they have it, and how much it is.

Mike

  • Author

The name escapes me right now. I also think I took my "leftovers" to the Hazmat recyclers recently. I'll check with the boat guy that recommended it to me. It worked well on vertical surfaces, but didn't last on flat horizontal surfaces. When it was fresh and new, it looked beautifully.

Mike

I think it'll do worse, to be honest...

We get more rain and snow then you, most likely. Maybe a film finish will fare better in AZ.

We seem to have similar climates - cold humid winters, hot dry summers. I have owned a sail boat for 20 years, and the varnish on the deck can last two years - if I'm lucky. The hull usually lasts 5 years. It's the sun that destroys the varnish. See this article from someone who knows more than me. He goes for 5 coats externally, one more than I do.

The best protection is shade - I now have a cover which protects the deck woodwork when moored. So now the cover needs replacing every 3/4 years or so rolleyes.gif.

If you're not too worried about spills (condensation rings, etc) I'd go for an oil finish for garden furniture. Not really an option for a boat though - not easy to build up all those coats when you're bobbin' around...

John

You know I am curious how well Marine grade Teak Oil finish will work on other wood species. I am very familiar with using Teak Oil growing up around sailboats on all the teak handrails and the other exposed teak wood and it held up well in a salt water environment if you were pretty regular about putting it on (somehow my Dad seemed to think it would break the kids boredom when we were floundering with no wind in the summer doldrums to have us rub oil into teak - somehow it just felt like another chore when I was that age). I do know the stuff does a damn good job in relatively tough wet environment at protecting teak.

But, I'll be damned if I am going to fork over the money to buy teak for this project. In cedar my estimate for wood cost using local lumber supplier price sheet is $75, in African Mahogany its about $142, in Honduran about $260 and for teak it jumps way up to $770. Sure teak has a bit of sentimentality to it for me given over 30 years of being around sailboats, but at these prices I will find another project to do out of teak thank you very much!!!

Anyway, I wonder if anyone has any experience using products like Interlux's Teak Oil Product (http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=44084&catalogId=10001&langId=-1&storeId=11151&storeNum=10104&subdeptNum=10374&classNum=10376) on other species of wood. Maybe an experiment is in order once I get the chairs built - though if it really discolors things over time in other woods I am not sure I want to risk it. Just curious what others thoughts on this might be.

Oh and did you notice the price of a quart of teak oil - if you thought wood working tools/products were pricey just add the word marine to it and see what it does to the cost.

Have you considered Iroko (African Teak)?

You know I am curious how well Marine grade Teak Oil finish will work on other wood species. I am very familiar with using Teak Oil growing up around sailboats on all the teak handrails and the other exposed teak wood and it held up well in a salt water environment if you were pretty regular about putting it on (somehow my Dad seemed to think it would break the kids boredom when we were floundering with no wind in the summer doldrums to have us rub oil into teak - somehow it just felt like another chore when I was that age). I do know the stuff does a damn good job in relatively tough wet environment at protecting teak.

But, I'll be damned if I am going to fork over the money to buy teak for this project. In cedar my estimate for wood cost using local lumber supplier price sheet is $75, in African Mahogany its about $142, in Honduran about $260 and for teak it jumps way up to $770. Sure teak has a bit of sentimentality to it for me given over 30 years of being around sailboats, but at these prices I will find another project to do out of teak thank you very much!!!

Anyway, I wonder if anyone has any experience using products like Interlux's Teak Oil Product (http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=44084&catalogId=10001&langId=-1&storeId=11151&storeNum=10104&subdeptNum=10374&classNum=10376) on other species of wood. Maybe an experiment is in order once I get the chairs built - though if it really discolors things over time in other woods I am not sure I want to risk it. Just curious what others thoughts on this might be.

Oh and did you notice the price of a quart of teak oil - if you thought wood working tools/products were pricey just add the word marine to it and see what it does to the cost.

  • 2 weeks later...

mayhaps an oil finfinish that can be reapplied at the begining of every season at least for us northeners would probably work?

These are some great finishing tips. I think no matter what finish I use it's going to have to be simple to re-apply or I'm just not going to do it. For a while there my Hubby and I were just using the Thomson's water seal stuff to finish the deck and the outdoor wood furniture. Since the painters PAINTED our deck a few summers ago...we no longer stain our deck so therefore all the outdoor furniture hasn't been stained either. Most of them have gone grey...but since I used cedar/redwood they are holding up just fine, aside from needing to be tightened up here and there.

I might lean towards an oil based finish because it's typically easier to apply and also easy to run out and get in your local area. I'll keep checking back here for other ideas.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.