Popular Post Ron Swanson Jr. Posted September 12 Popular Post Report Posted September 12 All the recent table saw discussion inspired me to show the old girl some love this morning. Cleaned out the cabinet and internals, lubed the lube points and gave the cast iron a good refreshing. Looks pretty good. Before: After: By the way, does anyone have a good strategy for removing fouling? This is a mystery I've never been able to crack. 4 Quote
Popular Post gee-dub Posted September 12 Popular Post Report Posted September 12 Rust Free by Boeshield is my go to for removing shadows. Read the directions! It is caustic and should not stay in place very long or it does more bad than good. On the other hand, if you get that top showroom ready the very first thing you are going to do is drag something terrible across it 3 Quote
Ron Swanson Jr. Posted September 12 Author Report Posted September 12 On 9/12/2026 at 11:01 AM, gee-dub said: On the other hand, if you get that top showroom ready the very first thing you are going to do is drag something terrible across it Story of my life! I'd spend a month getting it absolutely perfect and then leave a soaking wet beach towel on it before going on vacation, or something like that. Thanks for the tip, I'll try the Boeshield. Today I used mineral spirits and red 3M scouring pad on a ROS. 1 Quote
Ron Swanson Jr. Posted September 12 Author Report Posted September 12 @gee-dub Any particular tips or tricks? Quote
Popular Post gee-dub Posted September 12 Popular Post Report Posted September 12 Wear gloves. Have good ventilation. For lighter stains I will spray it on a rag and use the rag to deploy the product. This lets you get a feel for how it is going to act. Once you are used to it I will carefully spray the product directly on the cast iron but I am standing at the ready with gloved hands and a rag to spread things around or wipe them off as required. A damp rag (well wrung out) can sometimes work well to spread the product over larger areas thinning it out a bit. Have a spray bottle of mineral spirits nearby to wipe things off if it starts to get ahead of you. I have pulled some serious shadows out of old cast iron tables as well as touched up spot marks on things. The "contains phosphoric acid" text on the front of the container gives you a clue. It doesn't "let slip the dogs of war" but it does have a definite reaction on things. 5 Quote
Ron Swanson Jr. Posted September 12 Author Report Posted September 12 On 9/12/2026 at 5:14 PM, gee-dub said: It doesn't "let slip the dogs of war" but it does have a definite reaction on things. Once more unto the breach, dear friends. Once more. Thanks man! I shall report back soonly! 1 Quote
Popular Post Ron Swanson Jr. Posted September 12 Author Popular Post Report Posted September 12 @gee-dub If our paths cross in person, the beer is on me. That stuff worked well! This has been a small annoyance of mine for years and years. My camera isn't doing it justice, but my table hasn't looked this nice since it was brand new. Next up is my jointer, which doesn't have much to clean up on it. (I especially appreciate the advice, because I predictably overdid it at first, but had MS on standby and got right on top of it. No harm done) 6 Quote
Botch Posted September 13 Report Posted September 13 On 9/12/2026 at 4:14 PM, gee-dub said: The "contains phosphoric acid" text on the front of the container gives you a clue. As does Pepsi. 1 Quote
Popular Post Mark J Posted September 13 Popular Post Report Posted September 13 I suggest storing the Boeshield inside a plastic container (with a wider base). A bottle I had stored in a steel cabinet got knocked over, unnoticed. It leaked a bit which corroded the steel cabinet floor. 4 Quote
Popular Post gee-dub Posted September 13 Popular Post Report Posted September 13 Mark is correct. I keep mine in a heavy zippy bag and that stands in a tray. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.