Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

German Peraire - YouTube

Featured Replies

  • Popular Post

I have discovered a guy on YouTube and actually gotten a lot of practical instruction from his videos. 

He's got a 7-8 part series on dovetails and lots of other content as well. 

I just cut a DT using a few tips I picked up and the improvement over my usual process is significant. 

20261107_161112.thumb.jpg.7e361e4ceb589a140db652551c8f2106.jpg

Anyway 

His name is German Peraire. He's Spanish. He's very good at providing camera shots to show exactly what he's seeing, and is incredibly granular in the level of instruction. 

Anyone looking for pointers or tips to improve on your hand work, I recommend giving him a shot. 

 

  • Author
  • Popular Post

Here's the most valuable tip I've picked up so far. I don't think I've never heard anyone else mention this before. 

But to help saw straight, make sure you're watching the reveal between your saw plate and the work piece. If it's nice and even, you're probably pretty straight. If it's wide on end and closed on the other, you're not. 

This has paid almost instant dividends. My eyes have always been focused on whatever line I'm trying to follow. It seems kind of obvious now, but I sure hadn't ever really focused on it before.

 

20261108_134709.thumb.jpg.c20ab3351d9c65986539574853726682.jpg

I've watch Germán's first three dovetail videos and second your remarks - he's got a nice process with a number of tips and tricks, and does a good job sharing it in his videos.

  • Author
32 minutes ago, pkinneb said:

Thanks for sharing I am really enjoying and learning from his video's!!

Glad to hear it! 

Another thing that I've found helpful - 

If you have to pare your pins, making the "release cuts" at the base of the pin has been very effective in clearing out that corner. 

What do you think about angling the boards so you are always cutting straight down? Thinking I might give that a try.

  • Author
44 minutes ago, pkinneb said:

What do you think about angling the boards so you are always cutting straight down? Thinking I might give that a try.

I think that whatever works, works; and there's no cosmic scorekeeper in the sky keeping track of our methods. Give it a shot!

I should probably also mention that for me, one of the more challenging parts of a DT is cutting the pins perfectly plum. My saw really seems to like to drift to the right just a tick. 

  • Popular Post
2 hours ago, Ron Swanson Jr. said:

I think that whatever works, works; and there's no cosmic scorekeeper in the sky keeping track of our methods. Give it a shot!

I should probably also mention that for me, one of the more challenging parts of a DT is cutting the pins perfectly plum. My saw really seems to like to drift to the right just a tick. 

I have this drifting to the right problem with my hand sawing as well. I find taking a big step back with my right foot and then sliding it to the left to make more room for my right elbow to move freely helps. (I'm right handed.)

  • Popular Post

Doug I got to the saw plate reflection bit you were speaking of above and agree its a great tip. I think I watched like 3 hours of his video's today. With 5 days to go at my day job my replacement has pretty much taken over so YouTube has been filling some new found down time :D

  • Author
  • Popular Post
10 hours ago, pkinneb said:

Doug I got to the saw plate reflection bit you were speaking of above and agree its a great tip. I think I watched like 3 hours of his video's today. With 5 days to go at my day job my replacement has pretty much taken over so YouTube has been filling some new found down time :D

You're about to become very wealthy in the single greatest commodity known to man: TIME. 

I'm happy for you! (And a little envious) ;)

  • Popular Post

I started episode 8 and perhaps I missed it, but I've just realized Germán is building a jig for making dovetail joints and not just an example piece. Made it more clear to me why he was being such a perfectionist (though I suspect it's his nature).

I was fascinated about how he squared the one corner by planing the face instead of the edge. Never would have occurred to me to do it that way. Took me a while to wrap my brain around how he was going about it, though it's simple now that I get it.

  • Author
  • Popular Post
7 hours ago, Von said:

I started episode 8 and perhaps I missed it, but I've just realized Germán is building a jig for making dovetail joints and not just an example piece. Made it more clear to me why he was being such a perfectionist (though I suspect it's his nature).

I was fascinated about how he squared the one corner by planing the face instead of the edge. Never would have occurred to me to do it that way. Took me a while to wrap my brain around how he was going about it, though it's simple now that I get it.

Funny you mention this, as I'm midway through building this jig. It's a much more streamlined version of one I built a while back. Though I have no illusions that mine will come out looking as nice. 

But as long as it does it's job reasonably well. 

  • Popular Post
On 11/13/2026 at 3:33 PM, Ron Swanson Jr. said:

Funny you mention this, as I'm midway through building this jig. It's a much more streamlined version of one I built a while back. Though I have no illusions that mine will come out looking as nice. 

But as long as it does it's job reasonably well. 

That and his winding sticks are on my short last after the tool cabinet is complete. I'll say again this was a great find for those that are using hand tools. His video's are well done and straight to the point. I really like his presentation and have joined is membership to get additional access.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.