Recommended Posts

Posted

I found a older Performax 22-44 Pro on Craigslist for $500.

It needs cleaning, a new conveyor belt and a dust hood. I found a manual online. I have been searching for the parts I need and I can get the belt and sandpaper but I have only found the dust hood on the Jet site. I might need the inboard paper retaining clip as well but I can’t find it. Does any know where I can get parts for this sander? It’s Model # 638002.

Thanks.

Posted

Wow, excellent find.

If you have the manual, you can locate the part numbers of whatever you need. From there, you can make an order at Jet's parts desk.

Once you have a list of the part numbers and quantities, you can contact Elvira Goree (or call 800-274-6848) at the WHM Parts Desk and see about how to order through them. She handles orders.

If you have more specific questions about that unit and need to know what to order, talk to David Gentili; the guy really impressed me. If you'd rather call, he's at: 800-274-3846 ext. 1322.

You might actually want to talk to David beforehand for anything really specific since there might be a different parts list for your model. Sometimes the model number isn't what's on there :) For example, the model number may select one of three produced models and you have to give a part number off a motor or something.

If this is too much of a hassle, I'll give you my mailing address and I'll take that sander off you B)

Good luck!

Posted

Great find!!! I've got the Delta 18"-36"...not a great design, but it will do until I can afford to upgrade to the Performax 22"-44". Congrats Don!

Posted

I have the Jet 16/32 and love it. There was a problem with the conveyor trackingwhen I first got it and nothing we did helped and after sending me a new conveyor setup that had the same problem they did some investigating at Jet and found that they had gotten belts from a different manufacturer it was actually the belt it's self that was the problem. They sent me 2 of them to make sure I was up and running. I offered to send the conveyor setup back because not only was it not the problem but I also felt bad- they told me not to and keep it for the inconvenience! I had called a different number (must lead to the same place)800-274-6846 and talked to Dave 1322 (same as Paul did) and Gary (1321) For me both were great but Gary was able to get things going more, probably just coincidence but that's my experience. I am sure you can get any parts right through them, keep us posted and good luck.

Nate

Posted

Hello,

I am about to pull the trigger on an older Performax 16/32 with a partial torn conveyor belt, for $460 from Craigslist. I have read that some people do not prefer the 'sandpaper' conveyor and prefer the rubber belt from the link below:

http://www.accuramachinetools.com/replacement-conveyor-belt-for-accuraryobiperformax-etc-1632-sa.html

Description from the link:

Product Description

This one of our most popular items that we offer in our parts department! It is made of heavy grade rubber like what many people use for feed on wide belt sanders. It greatly improves feed over the regular sandpaper style belt that comes standard on this type of machine. We receive many compliments on this item, citing its ease of use and durability. A wonderful improvement for any of these machines!

Any comments on Rubber vs Sandpaper conveyor belts??

thanks and apologies for hijacking the thread. :-)

-mike

Posted

I called the tech line and the guy was very helpful. He transfered me over to the parts dept. and ordered what I needed.I'll see if his advice was any good when I get the reatiner clip. He said I could replace it without removing the drum. I fought with the old one for hours getting it out. Hope it goes in easier.

I looked into the rubber belts but couldn't find one for the 22-44.

Thanks guys.

Posted

I am about to pull the trigger on an older Performax 16/32 with a partial torn conveyor belt, for $460 from Craigslist. I have read that some people do not prefer the 'sandpaper' conveyor and prefer the rubber belt from the link below:

-snip-

Any comments on Rubber vs Sandpaper conveyor belts??

I have the sandpaper on my 16/32. When I went to order the conveyor belt, I was ordering from a Jet dealer, not directly from the parts desk. He carried both types of belt. I asked for a rubber belt and he suggested I stick with the sandpaper one (though it is half the price of the rubber). He said a lot of his customers complained that the rubber belt would track oddly and need realigning. Why? I dunno, but that was his advice and I tend to trust this guy.

If someone has actual experience with the rubber belts, though, let us know.

Posted

I have the sandpaper on my 16/32. When I went to order the conveyor belt, I was ordering from a Jet dealer, not directly from the parts desk. He carried both types of belt. I asked for a rubber belt and he suggested I stick with the sandpaper one (though it is half the price of the rubber). He said a lot of his customers complained that the rubber belt would track oddly and need realigning. Why? I dunno, but that was his advice and I tend to trust this guy.

If someone has actual experience with the rubber belts, though, let us know.

Allow me to talk out of my ars. ;o) I believe the sandpaper over the rubber conveyor belt would be superior simply because the rubber one is more pliable and that in itself would cause problem in tracking.

Btw, intermittently Sylvia likes to ask this question of a particular piece of knowledge or advise I offer up to her, "Does that statement have ass matter on it?"..lol Love my wife. She's know me well.

  • 2 years later...
Posted

Don where did you find your manual? I picked up a performax 22-44 at a local high school garages sale. they were updating their shop equipment and no one wanted it so I got it for $50.00 I do need a new drive belt but other than that everything seems to work fine.

Posted

GREAT sander! You're going to love it.

I've been thrashing mine on every project since 2005, and I simply would not be without one. I bought mine instead of upgrading my lunchbox planer, and I'd do it all over again.

$500 is gloatworthy, too! :D

  • 7 years later...
Posted

tracking issues on a performax 22-44. 

This machine was bought used 5 yrs ago and never had a problem until 9 mp. ago. always trackers to the right side........3 ceramic trackers, new bushings, and new belt later and I am still tracking to the left.  can NOT adjust it to track straight. I feel I have tightened it as far as possible.........has anyone heard of the rubber drive roller being worn and causing this?........doesnt look obvious to me?

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 37 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined