Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lie-Nielson Dovetail Saw - Normal, Thin Plate, Progressive Pitch?

Featured Replies

Looking to pickup a dovetail saw from Lie-Nielson soon. I notice it comes in a few versions, regular, thin plate, and progressive pitch. I've read a few articles about the progressive pitch. People seem to like it or don't care either way. I was wondering if anyone here had an opinion? I'm just looking for a good general-purpose dovetail saw.

Thanks

My wife gave me the progressive pitch a couple of Christmases back, and I love it. It is easy for a beginner to start, and even after you get starting a saw down pat the progressive teeth come in handy, I find myself using just the toe for really thin pieces, and the more aggressive teeth for thicker ones. I also catch myself getting the kerf established with the toe, then using the middle section to quickly rip down, then back to the toe to slow down the cut to the baseline.

The regular is a fine saw, it works very well.

The thin plate is a hotrod. It will finish a full depth kerf in three or four strokes less than the other two. If you make London style dovetails, with a single kerf entry point, your pins won't get any skinnier. I would guess that it's slightly more prone to kinking, and I would put this saw in the "advanced class". However, I have seen brand-newbies to handsawing have success with all three, and I think the best advise I could give is to head to a LN Hand Tool Event and try them all out for yourself.

Did you consider the Rob Cosman dovetail saw? I was in a Woodcraft seminar with him yesterday and i got to hold one in my hand and see it in action. I bought one on the spot. It is a very impressive saw. It was a bit pricey, but I got 20% off for being in the seminar.

  • Author

I did not. They do look quite impressive though. But at over 2X the cost, I'm not sure that I have the skills to wield such a beast :)

Is this your first dovetail saw? If so I'd probably just go with the regular 15ppi one. The thin is supposedly pretty easy to kink if your not careful or don't have good control of your sawing yet. Also, the thin kerf means your chisels need to be able to get closer into the edge when you chop out the waste (require finer bevels), and it might (can't say for sure) make it harder to maneuver a coping/fret saw in the kerf as well.

The prog. pitch could be a great option, since it's added speed would give you some more versatility, but I wonder if it would be harder to learn on. If your just starting out, I say keep things as simple as possible, and get the regular.

I bought the LN progressive pitch as my first dovetail saw, and I really like it. Of course, I don't have any point of reference for comparison... The saw is such a pleasure to hold and learning to use it came easily. Just don't get carried away with downward pressure and you're all set. :)

Have you checked out the Veritas DT saw , it's a little cheaper then the LN saw but don't let the price fool you the quality it right up there with the high dollar saws . I don't know where your located , perhaps you have a WoodCraft store close by , you can try them out there .

  • 2 weeks later...

I got the normal 15 tpi one for my birthday 6 months ago. Haven't used it a lot yet but seems to work quite well and is easy to use. I thought about the progressive tooth version but since I'm not horribly knowledgeable about hand tools I figured I'd ask for the standard and then at least I'd know what I liked and didn't like about it.

So far I haven't had any problems starting a cut so not really missing the progressive tooth version however I've never tried one so who knows...

-Jim

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.