Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I always thought a table saw's main duty was ripping!

Featured Replies

"Resaw king"...is that a Laguna blade? What is ww2?

What is your table saw blade that gives the smoothest finish?

Resaw king is the Laguna 2/3 carbide bandsaw blades. Ww2 is the Forrest 40t combo blade. Keep them sharp and they rip great, no real need for a rip blade.

Don

Wilbur,

What do you use to make one edge parallel to the other? I have a table saw but to be honest I hate using it because it scares me a little everytime I go to rip a board. Makes nice crosscuts but it seems like kind of a waste. I was thinking about selling it and using the proceeds to put toward a TS55.

James

Short answer: I mark a parallel line, cut along the line, and use a plane to clean up the edge. I also happen to have a Festool TS55 and the parallel jig, which does a pretty good job of cutting a parallel edge.

Long answer: For the most part, I don't worry too much about that particular task. I know this is going to sound pretty weird, but why do you need to have one edge of a board be parallel to the other?

I think one thing that gets missed in the power tool/hand tool discussions is that the two approaches sometimes result in different methods of working. If what you are doing is using a table saw to make parts for a box out of plywood, then you do need the sides to be parallel to each other. One of the main reasons is that there aren't easy ways to machine plywood to correct out of parallel errors if your table saw isn't perfectly set up. And remember, usually these aren't huge errors. These are errors on the order of 1/64" or so. So a lot of effort goes into ensuring that your table saw is perfectly aligned to create parallel edges, because you have to have the parts perfectly sized to start.

If, on the other hand, you're using hand tools and solid wood, your workflow can change. Instead of worrying about having a bunch of identical parallel boards, you can have boards that are close to square with one reference side and one reference edge, assemble your box (with dovetails, I would guess), and then use a plane afterwards to tweak the box to be perfectly square. Since I have a method of tweaking the fit after the box is assembled, I don't necessarily have to have a board with perfectly parallel sides to make it. Of course, the closer I am at the start, the less tweaking I have to do at the end. But I don't need to have boards with parallel sides to the degree that a perfectly dialed in table saw will give me. If you're making a box out of plywood, edge planing a piece of plywood won't be much fun at all, even with a good plane.

Both methods will result in a square and well made box. But in the first, you need the parallel sides up front before making the project. In the second, you'll dial in the fit after the project is made.

Short answer: I mark a parallel line, cut along the line, and use a plane to clean up the edge. I also happen to have a Festool TS55 and the parallel jig, which does a pretty good job of cutting a parallel edge.

Long answer: For the most part, I don't worry too much about that particular task. I know this is going to sound pretty weird, but why do you need to have one edge of a board be parallel to the other?

I think one thing that gets missed in the power tool/hand tool discussions is that the two approaches sometimes result in different methods of working. If what you are doing is using a table saw to make parts for a box out of plywood, then you do need the sides to be parallel to each other. One of the main reasons is that there aren't easy ways to machine plywood to correct out of parallel errors if your table saw isn't perfectly set up. And remember, usually these aren't huge errors. These are errors on the order of 1/64" or so. So a lot of effort goes into ensuring that your table saw is perfectly aligned to create parallel edges, because you have to have the parts perfectly sized to start.

If, on the other hand, you're using hand tools and solid wood, your workflow can change. Instead of worrying about having a bunch of identical parallel boards, you can have boards that are close to square with one reference side and one reference edge, assemble your box (with dovetails, I would guess), and then use a plane afterwards to tweak the box to be perfectly square. Since I have a method of tweaking the fit after the box is assembled, I don't necessarily have to have a board with perfectly parallel sides to make it. Of course, the closer I am at the start, the less tweaking I have to do at the end. But I don't need to have boards with parallel sides to the degree that a perfectly dialed in table saw will give me. If you're making a box out of plywood, edge planing a piece of plywood won't be much fun at all, even with a good plane.

Both methods will result in a square and well made box. But in the first, you need the parallel sides up front before making the project. In the second, you'll dial in the fit after the project is made.

Wilbur,

Thank you very much for this explanation and it does make sense. I really don't use plywood at all. I suppose if I was making some shop cabinets I would use plywood. I work mostly with hardwood, my planing skill are not the best but I have gotten away from hand tools, especially handsaws because I have tendonitis in my wrist and nerve inflation in my leg and pelvic area that seems to get worse when I handsaw. I don't like using my table saw, I don't trust it and I don't trust myself mainly because of a lack of experience or proper education. I did get a bandsaw recently so I could rip thicker stock with it. I have someone who is going to purchase my table saw from me this week and I am heavily leaning towards putting that money toward a TS55.

James

My shop workflow brings long unsurfaced hardwood into the shop where it is given a straight edge with a 12' jig on my cabinet saw.

Following that operation, one face is flattened on the jointer minimally and stacked vertically.

From there I can thickness or rip and stack boards for final dimensioning with the SCMS. Or I can

Route an edge or run it through the molder/shaper.

I use my cabinet saw more than any other tool.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.