Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Southpaws

Featured Replies

I can't be the only lefty out there. Is anyone else considering relocating the vises to the opposite ends of the bench? Sure, a right-side orientation for the tail vise is perfectly workable for a southpaw, but might it be worth switching for that tiny bit of convenience?

I am planning on doing so, because it will make a difference in planing.

Not sure if I'll be starting the build soonish, but as a lefty you'll (or at least I would) definitely want to swap the vice locations of the vice, since you want to work from left to right, you know a way that makes sense unlike those crazy right handed folk.

I can't be the only lefty out there. Is anyone else considering relocating the vises to the opposite ends of the bench? Sure, a right-side orientation for the tail vise is perfectly workable for a southpaw, but might it be worth switching for that tiny bit of convenience?

Yes. I am lefty and am switching the vises. Just work off the plans in the reverse fashion and take a good look at tail vise installation for left handed use. This will make a difference as planing in the leg vise your planing action will always be into the vise.(which is what you want to be doing.) If or when you are watchiing videos it will seem awkward because everyone else is doing it in the reverse fashion, but after about 1 or 2 weeks working with the vises in the correct locations it will become natural to you. Working in the tail vise it will also become apparent that this is the more natural orientation for your handedness.

Yes you want to switch the location of the wagon vise because you don't want to be planing in to the screw. While Benchcrafted makes outstanding stuff and if anyone can stand up to it their stuff could, but that added pressure will wear out the hardware. By shifting the end vise to the left, lefties will plane into the dog hole which is immoveable. Your leg vise could go on either site but it just makes sense to balance it out by putting it on the right front leg. My bench is set up this way and I have worked a lot on right handed benches. It does make a great difference not to have to adapt (even though we have been forced to do it all our lives, sniff, sniff, whimper)

Good luck

Just a quick note that even though I am a "crazy rightie", I'll include at least one page in the final plans showing a left-handed bench. Really it will just be flipped end for end.

  • Author

Great point, Shannon. I'm pretty much ambidextrous, but do favor the left. I was pretty much on the fence about switching the tail vise, but now I'm sold.

I will be switching the vises. I just keep reminding myself to take the time get the dog holes oriented correctly - I just finished rebuilding a drawer after forgetting that by switching to pocket screws I needed to reduce the width due to front and back panels position. I don't want to end up with a strip of dog holes all pointing in the wrong direction.

I will be switching the vises. I just keep reminding myself to take the time get the dog holes oriented correctly - I just finished rebuilding a drawer after forgetting that by switching to pocket screws I needed to reduce the width due to front and back panels position. I don't want to end up with a strip of dog holes all pointing in the wrong direction.

Make sure dogholes are leaning in the direction of the tail/wagon vise and you will good.

I can't be the only lefty out there. Is anyone else considering relocating the vises to the opposite ends of the bench? Sure, a right-side orientation for the tail vise is perfectly workable for a southpaw, but might it be worth switching for that tiny bit of convenience?

Not that this necessarily applies to you but while I'm naturally left-handed, I plane from my right side. So my bench will be oriented that way. FWIW, I also hit from the right-side when I played baseball. Go figure.

Not that this necessarily applies to you but while I'm naturally left-handed, I plane from my right side. So my bench will be oriented that way. FWIW, I also hit from the right-side when I played baseball. Go figure.

Ditto. We're a rare breed. The opposite is much more common. I think it means we're geniuses or something. Or weirdos.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.