WorkTheWood Posted January 23, 2012 Report Posted January 23, 2012 I am pretty much a complete newbie and was looking through my just arrived Grizzly catalog. Help me understand more about the benefit of a sliding table saw like this one: http://www.grizzly.com/products/10-Sliding-Table-Saw/G0623X A few questions:Is the concept that it is basically a giant "cross-cut" sled that will let you "rip" long pieces?Is a sliding table saw a lot safer than a "regular" table saw?What about a sliding table saw compared with the "safety" of a Saw Stop? Thanks! Quote
Freddie Posted January 23, 2012 Report Posted January 23, 2012 What you can do with a sliding saw is incredible, provided you have the space for one. I wish I had room for a sts. It makes working with sheet goods a one-man-operation. One of my favorite features is the ability to line rip a board. The other cool thing is the scoring blade that scores your sheets before the full kerf blade makes its cut. As far as safeties concerned, my experience on a sliding saw is you can stay away from the blade due to the material being locked onto the slide table. I worked on a scmi saw, Im sure there are differences between the different companies, but same principals. Quote
flairwoodworks Posted January 23, 2012 Report Posted January 23, 2012 I own that exact saw and have written numerous articles for my blog on it. You can find them all under Entries, by Category -> Tools -> Sliding Table Saw. To answer your questions at the surface level: Q: Is the concept that it is basically a giant "cross-cut" sled that will let you "rip" long pieces? A: Basically, yes. It really excels at wide crosscuts and breaking down sheet goods with ease and control. The crosscut fence provides much sturdier than a mitre gauge. The scoring blade allows clean cuts top and bottom of veneered goods and melamine.Q: Is a sliding table saw a lot safer than a "regular" table saw? A: It can be. With the use of a hold down attached to the sliding table via the T-slots, I can clamp a small piece to the table and push it through standing four feet away from the blade.Q: What about a sliding table saw compared with the "safety" of a Saw Stop? A: There are some cases when my hands do get near the blade, most often when I am ripping narrow stock. While there are currently no saws that feature both a sliding table and the SawStop brake, SawStop tells me that they plan to have one in about a year. It will be a 12" saw and will not be cheap - likely over $18,000. Read these two articles for more on the saws:Why Not a SawStop Why a Sliding Table Saw with a Scoring Blade Quote
Freddie Posted January 23, 2012 Report Posted January 23, 2012 Is the grizzly sliding table saw a solid saw? Quote
flairwoodworks Posted January 23, 2012 Report Posted January 23, 2012 Well, it's not a Martin, but I like it. I've made a few modifications to make it easier to use. One thing that some people would complain about is the imprecise scale for the crosscut fence when setting it up for mitres. It's just a label with fat lines. Luckily, there are other tools to set the angle. Oh, and the blade guard is opaque orange plastic. I wanted to like it, but took it off after the first week. Bottom line: I would recommend this saw. Quote
Freddie Posted January 23, 2012 Report Posted January 23, 2012 I am not familiar with grizzly tools, and have heard mixed reviews, but being young without a ton of disposable income, I wanna believe they could be a worthy purchase. I was looking at one of their 8" jointers http://www.grizzly.com/products/8-Jointer-w-Spiral-Cutterhead/G0490X . It sounds really good for a 8" spiral head jointer, and not too bad on the wallet. I would like to hear your input Quote
flairwoodworks Posted January 23, 2012 Report Posted January 23, 2012 Freddie, I have a friend who I believe has that exact jointer. He is happy with it. I have the Delta DJ20 which I believe is the same design, minus the location of the switch. The DJ20 is a solid machine. I installed a Shelix head on it, which I love. Enjoy the disposable income. It doesn't last forever (Oops - I misread your post.) Quote
flairwoodworks Posted January 23, 2012 Report Posted January 23, 2012 Looking a bit more at the jointer, I do think that it would be a good purchase. I'm not sure how the Delta compares quality-wise, but I actually paid less for my brand-new DJ20 (without a spiral cutterhead though). I think that 8" is a good size. Personally, I wouldn't go any smaller and larger jointers cost significantly more coin. Quote
Vic Posted January 23, 2012 Report Posted January 23, 2012 While not as robust as Chris' set up, I have the Excalibur Sliding table for my saw and LOVE it. I hardly ever use my scms. There's simply no reason. Quote
WorkTheWood Posted January 25, 2012 Author Report Posted January 25, 2012 Thanks for all th ereplies everyone. Some great info! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.