Recommended Posts

Posted

I used my veritas mx2 honing guide (I think that's what it is called) last night to hone the plane blades on my #4, #5, and, #6. I honed a primary bevel @ 27 degrees and a back bevel at 10 degrees. Does this sound OK? I haven't had a chance to test them but I was able to shave half of my leg.

Posted

The 27 degrees on the front is great, but I wouldn't advise honing a back bevel (not counting the ruler trick) unless you intentionally want to increase the inlcluded angle of attack. You have essentually convertaed all your planes to high angle (45 degree bed + 10 degree back bevel = 55 degree included angle) planes. This is good for planing very hard curly woods or woods with interlocked grain as it will decrease tearout, but for general use not so much. Higher angles make the plane harder to push, so generally you don't want to go above 50 degrees (included angle) unless you specifically need to for the woods you are working. Additionally, having a back bevel creates more work when rehoning since you now have to take the blade out of the holder and reset it to work each side of the bevel. Generally, you want a flat back so that you can just run the back of the blade flat across the stone to remove the burr that is formed when honing (my preferance). Others prefer to use the ruler trick to create a very slight back bevel and thus lessens the amount of metal that you need to hone on the back of the blade - the back bevel this creates is so small and fractional that it does not increase the angle of attack in any way that matters.

Since you already created the back bevel you can just leave it and it will work fine (but be harder to push), but unless you are working wood that is highly prone to tearout I advise regrinding the blades to grind off the back bevel and then rehoning with a flat back or ruler tricked back.

BTW - where in bucks county are you? My soon to be in-laws live in Upper Black Edy, and I'll be permanently moving to Philly this June/July. If you are new to handplanes I'd be happy to show you how to get the most out of them once I'm back in the area.

Good Luck!

Posted

Thanks for the great response Chris! I live in Newtown and work in Philly (40 mile commute) upper black Edy is like 30 min north of me. And yes, I'm very new to handplanes and yes I'm trying to get at much from them as possible! Thanks again Chris!

Posted

That's not too far from Philly but YIKES, that must be a long daily commute in Philly traffic! Anyway if you can wait about 4 months, shoot me a message and I'll be happy to meet up with you and share with my lack of expertise....

Posted

Don't want to step on ChrisG's toes, but I live in East Brunswick, NJ, and if you want to come by, I'd be happy to get you set up with planes/sharpening.

No toes stepped on - I'd choose your help over mine any day. Besides I won't be up there for 4 more months.

Maybe you and Bob R can get together with him and try to win him over to you styles of plane (East v. West) - you'll be like darth vadar and obi won (and no I'm not going to say which one of you is which) battling over his loyalities.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Lenny2
    Newest Member
    Lenny2
    Joined