terryaucoin Posted February 28, 2012 Report Posted February 28, 2012 Greetings I am in the need of some 12x8x2 15/10 boards LxHxW cut into long wooden wedges. I will need 2 wedges of pine, or any ofther soft wood. (has to be spot on 20 degrees). Terry Quote
mkmarler Posted December 4, 2012 Report Posted December 4, 2012 Do you have a budget or an amount you would like to spend on this. Can do it but for spot on 20 degrees will take some set up and time. Quote
Beechwood Chip Posted December 4, 2012 Report Posted December 4, 2012 My father the machine designer taught me that no dimension is ever "spot on". Do you mean within 0.5 degrees? 0.1? 0.05? 0.01? 0.005? 0.0000001? Keep in mind that the price goes up with each decimal place. Quote
wdwerker Posted December 9, 2012 Report Posted December 9, 2012 I just noticed the original poster hasn't been online since March. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.