Jfitz Posted March 17, 2012 Report Posted March 17, 2012 Hi - there's a P60 with Shelix head and mobile base, available near me. I am not necessarily looking to upgrade from my current 6" jointer, but if I get a few hundred for my current jointed and get I to an 8" with spiral cutter, I might. Does anyone have any experience with the P60? Quote
Sac Posted March 18, 2012 Report Posted March 18, 2012 Hey, if you can find a good deal on one then i think it would be an excellent upgrade. As far as i am concerned, you can't go wrong with a spiral head. Quote
dwacker Posted March 18, 2012 Report Posted March 18, 2012 The old pm's had 5/8 and 3/4 arbors. The 5/8 is to light duty for a steel head and will eat bearings. Check the arbor size. Don Quote
Trip Posted March 18, 2012 Report Posted March 18, 2012 ==> As far as i am concerned, you can't go wrong with a spiral head. Due to sales/marketing pressure, many things are called 'spiral' these days. Think FWW had a clarification article a couple of issues back. True helical heads (shelix, et all) work well (with some limitations), but the segmented, hybrid, semi-helical, et al heads are of much less utility (and much cheaper to deploy by the mfgrs who also label them as 'spiral'). Quote
Sac Posted March 18, 2012 Report Posted March 18, 2012 ==> As far as i am concerned, you can't go wrong with a spiral head. Due to sales/marketing pressure, many things are called 'spiral' these days. Think FWW had a clarification article a couple of issues back. True helical heads (shelix, et all) work well (with some limitations), but the segmented, hybrid, semi-helical, et al heads are of much less utility (and much cheaper to deploy by the mfgrs who also label them as 'spiral'). I use the term loosely... spiral, segmented, hybrid, whatever you want to call them, will be an upgrade compared to straight knives. Quote
Trip Posted March 18, 2012 Report Posted March 18, 2012 ==>I use the term loosely... spiral, segmented, hybrid, whatever you want to call them Figured that, but did not want the larger audience to believe that 'all spiral heads' are created equal. ==>will be an upgrade compared to straight knives. Debatable for a jointer --- I have gone from tersa to helical and back to tersa on the jointer... and considering a return on the plainer. if you take cost out of the equation, tersa/monoblock is the way to go on the jointer... the plainer is a more interesting discussion... Quote
cbehnke Posted March 19, 2012 Report Posted March 19, 2012 Hi - there's a P60 with Shelix head and mobile base, available near me. I am not necessarily looking to upgrade from my current 6" jointer, but if I get a few hundred for my current jointed and get I to an 8" with spiral cutter, I might. Does anyone have any experience with the P60? I just sent you a PM, I saw that PM also on CL...out of my $ range, but I'd love to hear what you might sell to raise $ for the PM...I'm looking for a good jointer. Thanks. -Craig Quote
Jfitz Posted March 19, 2012 Author Report Posted March 19, 2012 Thanks for the info and advice, everyone. I've decided to stay with what I have, and put the money to use elsewhere. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.