Ken Wilsbach Posted May 26, 2012 Report Posted May 26, 2012 as a budding wood worker, i'm doing a lot of research. naturally info is all over the place... bare bones... what planes do i need for working with rough cut stock? with the assumption that zero power tool will be used, what do i need? after that, what do i need to finish things? Quote
Tony Wilkins Posted May 26, 2012 Report Posted May 26, 2012 I'm just researching this myself. Here is The Schwarz on The Woodwright Shop explaining planes that might be a good answer to your question: http://www.pbs.org/woodwrightsshop/video/3100/3105.html A common answer to the question seems to be get a Jack Plane (Stanley #5) because it is versatile and with blades can do many jobs on the wood. Quote
James Finley Posted May 26, 2012 Report Posted May 26, 2012 Start with a jack, then a jointer then a smoother. Depending on budget and the size of the work you are doing, you can often get everything you need from a few planes if you are willing to take some time to set them up. Get a Stanley #5 of eBay, refurbish it and flatten and hone the blade, and practice flattening stock. As you get better at it and as your projects grow in scope you will grow your collection, but better yet you will know better what you need as you grow. --James Quote
Ken Wilsbach Posted May 26, 2012 Author Report Posted May 26, 2012 I'm just researching this myself. Here is The Schwarz on The Woodwright Shop explaining planes that might be a good answer to your question: http://www.pbs.org/w.../3100/3105.html A common answer to the question seems to be get a Jack Plane (Stanley #5) because it is versatile and with blades can do many jobs on the wood. that video was exactly what i needed, thank you Quote
nateswoodworks Posted May 27, 2012 Report Posted May 27, 2012 I would definitely add a scrub plane to the list. For the cost it will dramatically speed up the process and shrink the effort required. Quote
John Luke Posted June 7, 2012 Report Posted June 7, 2012 I work with rough lumber all the time. I used to start with a heavily cambered #5, then I went to another #5 with an almost straight iron, then on to a #4 for smoothing. For jointing I used a #7 or #6. After many feet of lumber processed this way, I started trying different techniques. The planes I currently use in order are:Scrub plane (much better than a modified Jack in my opnion), #6 fore plane, then a #4 1/2 smoother. I find this combination of 3 planes allows me to flatten a board rather quickly Don't forget the winding sticks. Quote
aengland Posted June 7, 2012 Report Posted June 7, 2012 Blade camber for coarse work allows you most of the scrubs benefit in a 5, 5 1/2, or 6. Less blade camber makes for better jointing. Nearly straight, w relieved edges, is for smoothing. So, one plane fitted for each task is perhaps the minimum. However, block planes are incredibly helpful and useful, too! Shorter planes make better smoothers; longer ones, jointers. Most everything else is personality and the joy of use or discovery. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.