Tony Wilkins Posted June 2, 2012 Report Posted June 2, 2012 Right now I have two planes: Old Street Smoother and a 48mm Kanna I've run into the problem of needing planes to do the jobs they are designed for (i.e. trying, jointing, take chunks of wood to get something closer to square fast such as a scrub or jack). I've got an Old Street jack and try plane on order and will gladly wait the time for them (6 months). I set the kanna to work like a block plane for me taking almost moxon toilet paper sized shavings and it did ok. However, that won't be idea for the middle term I don't believe. However, I need something like a jack for in the intermediate. I've been hesitant to get something of ebay because I don't know what to look for and what right would look like when I got it if I had to fix something. I bet the plentiful Stanley #5 in the used market would serve me well. Where's a good place to get one fairly inexpensively but I can be guaranteed it won't be an unfixable paper weight? Other options for what I need? BTW, I'm not opposed to wooden stock or transitional with the same needs to work requirement. TIA Tony Quote
aengland Posted June 3, 2012 Report Posted June 3, 2012 Coarse, medium, and fine is how the "Schwartz" designated our prep needs. You've got the "fine" covered. For the medium and coarse...that's so individual!!!!! For me, I rarely use the scrub plane I looked so hard to find at reasonable price because it's an extra-extra coarse plane. I use it following chainsaw cuts (literally). Otherwise, my favorite hogg'n plane is a #6, which has the extra weight to help push through the rough stuff. My 5's are just a tad too light unless we're into medium--there they excel. So, the one plane that might just do both is a 5 1/2--preferably the LN. My Union is a nice plane but not as substantial as the LN (don't own one yet). Hence, I use the #6. YMMV Quote
JMort847 Posted July 8, 2012 Report Posted July 8, 2012 I also follow the Schwarz course, medium and fine approach, with a #4, #5 and #8. I have a #6c but tend to use the #5 for starters. I also have my Stanley 40 1/2 at the ready for the rough stuff, or when I have a bunch to remove. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.