Emill71 Posted June 5, 2012 Report Posted June 5, 2012 Alright gays and gals, I'm looking suggestions for a how-to book on building your own hand tools with good detailed drawings and explanations. I’ve watch all of Roy Underhill’s episodes off his website and have been enjoyed everything he’s put out. My shop is mainly power tools but I see how using hand tools is rewarding, I’ve been to the antique shops in my area and am blown away at the prices they ask for tools. I could buy a router plane for the same price i can buy a new router bit if not more! I’ve noticed there are a lot of woodworking books out there on tools or peoples methods on making tools but I can’t afford to buy a hand full of books to weed out the bad ones. It just so happens my local library doesn’t have much in regards to making tools. What I’m hopeful to learn is how to make a square, a rabbet plane, a mallet, a mortising gauge, marking knife and whatever else tickles my fancy. Any advice on good books would be appreciated.. Thank you, Erik Quote
Dave H Posted June 6, 2012 Report Posted June 6, 2012 There was a book I checked out from the library it was called (Making & Mastering Wood Planes, by David Fink, forward by James Krenov) it was a very good book very informative. Quote
Bob Rozaieski Posted June 6, 2012 Report Posted June 6, 2012 How to Make Woodwork Tools by Charles Hayward. There is a full PDF download of the book at the Toolemera Press here: http://toolemera.com/bkpdf/haywardhowtobk.pdf 2 Quote
Emill71 Posted June 6, 2012 Author Report Posted June 6, 2012 Bob and Higtron, Thanks for the suggestions. I'm going to have to check those out in detail. Ive got a few old lawn edger blades laying around, i was thinking I could to try and use for blade material. Would either one of you have any other suggestions? Have either of you made any of the tools out of these suggestions? Thanks agian guys. I'll post pictures of my rabbet plane as i get going on it! Quote
theapprenticeshand Posted June 6, 2012 Report Posted June 6, 2012 Making and Modifying Woodworking Tools by Kingshott He lays out how to make infill planes of many kinds as well as marking gauges, screwdrivers, etc. Quote
Onboard Posted June 6, 2012 Report Posted June 6, 2012 Here’s a book you may want to look at. And here’s a pdf that shows a few pages from this book. Quote
SamV Posted June 8, 2012 Report Posted June 8, 2012 Try this one Tool-Making Projects for Joinery and Woodworking by Steve A. Olesin. It has plans for most of the tools you mentioned and detailed instructions for making them. Quote
Emill71 Posted June 10, 2012 Author Report Posted June 10, 2012 Thank You for all the advice! Looking forward to try and make some tools to add to the collection! Bob, Ive watched a few of your potcasts and really liked the bench series you did. Do you still use the big doug fir bench you made? hows the softer wood holding up today? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.