Recommended Posts

Posted

I've played with Dremel and really enjoy my Foredom. There are some other options out there, but I really liked the industrial build of the Foredom. Essentially you are purchasing a motor with a range of commercial-grade options - most of which are somewhat interchangeable across the industry.

I suspect that folks unload their Foredoms because they overbought for their needs and would be surprised if there were significant dissatisfaction/performance issues.

Just a few hopefully relevant comments from the cheap seats..........

Posted

The motor is "comfortable" for high RPM operations and will run continuously. Depending on what handset you use you get varying degrees of vibration across the different bits. I have always been a nibbler when I carve - mainly small work within a wood field, so I do not run it for hours on end - 2-4 hours per session on average several times per month. This was a "nice to have" as a non-specialist general woodworker that is great to have when you need it. I sometimes use thin tactile gloves for grip and vibration mitigation.

As you look at a set, don't forget that the motor, shaft, handpiece, and speed control each play a role in the operating experience/performance. I have stayed stock out of the box with a foot pedal because I have not needed to specialize, but knowing I can customize if needed is a great feeling.

If I had to make an analogy - a remote motor/shaft is like taking a 500 mile trip on a Honda 1800cc Gullwing instead of a Kawasaki 400cc rice burner.

One of the "joys" of this setup is the various bits (Dremel and others) for polishing, cutting, routing, etc that you can use. I have always intensely disliked the Dremel vibration, weight, and awkwardness. Remote motor tools like this really open up the door for more surgical and flexible manipulation of surfaces, particularly with jigs.

Posted

i have a dremel, and while it is a good dremel its not a huge motor. it has a long fexible shaft and it works for sanding or rought grinding with w wheel but the actual carving is a bit slow

Posted

That's like putting a trailer hitch on a Ford Escort. Sure you can do it, but why would you? :)

To carry your bicycles! :P

To me, the difference between Dremel and the better flex-shaft "motor tools", is torque, which translates to momentum. Dremel uses rather wimpy lightweight motor internals, so the speed can jump all over the place if material density varies. It's been a while, but I noticed the difference in balsa and bass wood. I felt that the more constant speed made the bit easier to control.

Posted

good to know dont know how much ill be working with balsa and bass wood more like cherry, oak and walnut as that is local and i will turn that while i wont turn balsa. so i want to know that i will carve hard woods. i am also looking at this machine http://www.woodcraft.com/Product/2005912/19153/Wecheer-14-HP-Flexible-Shaft-Carver-Kit.aspx#Videos since it spins and cuts what do you think?

Posted

Great point on the torque and inertia, Barry.

I have no experience with that particular brand (don't know who does their windings, etc). The price is good, all the components are represented, and the hp is nestled between the 1/6 and 1/3 of a Foredom. At this point we're discussing brand vice platform/tool differences - and you know how those things go...... :)

Posted

if i wasent such a cheap skate i would buy both and return the one i dont like.

just found this brand mastercarver and i guess the comparing of this with foredom is there very similar and one is alot cheaper. and i guess it has a attachable head that lets you use recirocating blades.http://www.woodcarve...uctinfo/797425/ plus it is a huge price reduction.

changable head

http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=packard&Category_Code=carv-master-hand

and i guess it will hold flex cut reciprcating blades(i have some flex cut chip knives that are realy nice)

http://www.woodcraft.com/Product/2001951/2929/Deluxe-Gouge-Set.aspx

Posted

muhahahahah next i reveal in my bag of goodes the shrinking ray, x ray glasses, and the aways amazing Ray Charles.

i know your asking how did i catch ray charles well first you dig a big hole and then you sprinkle ashes in the bottom then when he looks in the hole you kick........

  • 4 months later...
Posted

thought i would update this i droped my mastercarver broke the switch and when i tried to turn it on it burnt out my wiring and the small motor guys said its junk i dont know if thats just because they didnt want to bother with it or if it realy is junk. the guys said he could not find a name brand on it anywhere. thinking of geting a 1/3 foredom off ebay now.

  • 3 months later...
Posted

sadly no soon after i had to stop turning from lack of space been playing with carving small carvings i use knives and gouges since it does not make alot of dust.  figure i would learn to carve traditionaly a little untill i come up with some projects to make with my carving machine.  the family does not want me to fill the house with dust so i just make chips with my knives and gouges. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined