Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Aerosol Lacquer

Featured Replies

Bought some aerosol spray lacquer at the local home improvement store for an aquarium canopy. I've never actually used a lacquer in any form so I wanted to give it a shot. I had done a little casual reading on lacquers and it seemed the consensus was that its best to spray it, and because of my lack of spray equipment I decided to go with the spray can. Its the same brand (Watco) as the can lacquer they were offering so I'm assuming its the same stuff.

Has anyone ever used watco aerosol lacquer before? Any tips for this or for lacquer finishing in general would be great. Also would I have any problems if I used a sealing coat of shellac underneath the stain with the lacquer?

I've used rattle can lacquer quite a few times; it's pretty decent stuff to use for a quick finish. I have found 1 major difference between brands and that is the type of nozzle that some use. If I remember correctly the brand I like is Deft. A few others I've tried their nozzle clogs after about 30 sec leaving you with almost a full can that won't spray! Lacquer is lacquer (pretty much the same among all the brands) so as long as it sprays from the can in a good pattern it should work well.

It isn't a building type finish meaning that each successive application somewhat melts the previous. The trick to a very smooth finish with this stuff is having the work piece sanded very smooth (220-320 grit).

I don't work much with shellac but I would imagine there may be some issues with putting lacquer over shellac. Lacquer thinner is the solvant for that and it's very strong stuff. My guess is that it would melt the shellac and not cure correctly (not 100% on that one; just a hunch). However I would think that once cured you could probably apply shellac over the lacquer.

If it's an option try and do your spraying outside (it has a very strong smell :-O) Apply thin coats! That's the trick; 4-5 thin coats and it will look very nice. Each coat dries in less than 30 min..

Also, if it's going to be over top an acquarium might be a good idea to let it cure and gas off for a few days before putting it in place (the fumes may contaminate the water).. When you can no longer smell the fumes coming off the piece you sprayed it should be safe for the fishies :)

Hope this helps!

~Andy

  • Author

The canopy is made out of solid cherry and the stain gets a little too dark and overwhelms the grain a bit if applied directly. Is there something else that would help mitigate this effect that would play nice with the lacquer?

Honestly I think I would try a test piece with the lacquer and not use any stain. This finish actually does pretty well bringing out the color of wood on it's own.. Also keep in mind that the cherry will probably darken a bit over time so if it's not dark enough initially it may be closer to what you're looking for after a week or so..

marc did a video on aplying finishes that should show you prity well how to use it. but basicly keep in mind that you dont want to move your wrist but move you arm back and forth smoothly. if you move your wrist you will end up with some spots thicker then others.

Spray bombs can apply GREAT finishes, but are expensive for what actually gets laid down. They're great for small items and ocassional spraying.

Apply thin, but wet coats.

Start before you're over the work, end beyond it.

Overlap each pass 1/3 to 1/2 of the nozzle's coverage.

Spray into your own overspray. In other words, spray the edge closest to you first, each pass moves further away.

Box your coats. One is lengthwise, the next is crosswise, alternate...

Expect to put many more coats on with a spray bomb than gun, as the finish in a can is very thin.

Those $3-4 "gun handles" sold for spray cans actually help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.