Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Water-based Acrylic lacquers

Featured Replies

Marc,

We just started a new custom drum company (M4 Drums) here in AZ and I am trying to determine a better way to finish the drums. I have been spraying Gerneral Finishes High Performance gloss/satin with good results. However, I can't quite get the high gloss "glass" finish I am looking for after buffing them out.

I have been reading about Lacquers but have never used one. It seems like Acrylic Lacquers might be the right choice because they don't yellow with age. I was wondering if there is a good Acrylic lacquer you prefer and/or is there a less toxic water-based acrylic lacquer available that will get us the results we want.

Thank you for your time and insight.

Mark

M4Drums.com

I'm a big fan of ML Campbell Ultrastar water based "lacquer", and have been using it since 2005. I spray it right from the can with a 4 stage HVLP, and clean it up with water. My local Pratt and Lambert paint store gets it for me.

On woods darker than the oaks, I usually add 1 drop to 32 oz. of Transtint Honey Amber dye. On raw birch, light maple, ash, etc... The product has a nice clean look right from the can. I need to point out that I have not used the gloss formulation, only the dull and satin.

Water based finishes can be messed up by oils, soaps, silicones, etc... So do some test panels with the entire process you plan to use, regardless of the brand and product you choose. This is why I prefer a true HVLP turbine setup for WB. Clean, dry air, never a chance of oil or water in the air supply, without filters, traps, etc...

If you're looking for a "glass finish" meaning absolutely no grain pits it might be worth trying a thicker material as you're filler / sealer. More often times than not when I'm looking for a mirror finish I'll do all my build up coats with a clear epoxy (West System 105/207 hardener). It would be best to apply by brush rather than spray but multuple coats can be applied in a day. The following day would require a bit of hand sanding but you would have a perfectly filled and smooth surface for whatever topcoat you would like to use. As far as I know cured epoxy is compatable with any kind of topcoat (water based, poly, acrylic, etc) and does not yellow or discolor the wood.. One note, if you're using any kind of an oil stain there may be some issues there. I believe WS is fine to go over TransTint stains though..

Just a thought..

Is the finish not smooth enough, or is it not clear enough? If it is not smooth enough, you may want to use the sanding sealer first to level the finish, and perhaps a grain filler. If it's a dry day ( extremely low humidity), you could try adding the modifier to the finish to slow the dry time.

I've used Enduro Gloss and polished to a high gloss finish many times.

I built a few custom drum kits a year or two ago and I used Sherwin Williams sanding sealer and topped it with Sherwin Williams gloss lacquer and I only did light buffing by hand and I could see myself in the reflection. It was great product, little pricey but went a long way!

I use M L Campbell's Agualente . It is a pre catalysed acrylic finish. It is compatable with their WoodSong stains. I use the Agualente sanding sealer to start with and build up a smooth coat and then top coat it. They also make a post cat version that you measure and add the catalyst before spraying. I get mine from Wurth cabinet supply (national chain)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.