Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finish for natural bamboo

Featured Replies

Hello, All,

I'm new to the forum and figured you guys would be able to point me the right direction for this project.

I make percussion mallets using bamboo as shafts. Natural bamboo(tonkin) with the enamel/skin still on is giving me lots of troubles when I'm trying to coat it with some sort of protective finish. Problem is that the skin is extremely non-porous and it's very challenging to get a finish to "stick" to it. I've tried oil based poly, GF enduro var, GF exterior 450, tru oil, tung oil, etc...all of them look very nice, but they can easily be scraped off with my finger nail. Most of these sticks take quite a beating being thrown in mallet cases and whatnot so I'd want something permanent and durable.

I realize that I could just leave the bamboo as is because of it's obvious natural strength, but changes in temp and humidity tend to crack bamboo and I also like the shine/polish that finishes produce..so do my customers.

Almost seems like some sort of epoxy coating or industrial sealant is what I need...? I apply all finishes by hand using a nitrile glove. When the enamel is sanded off, the finishes will "stick" because the enamel is removed and the finishes can be absorbed, albeit slightly.

I have used tung oil and that was more successful, but the process is too slow for my turnaround when trying to sell these.

Any help would be greatly appreciated!

Thanks!

When the enamel is sanded off, the finishes will "stick" because the enamel is removed and the finishes can be absorbed, albeit slightly.

It's pretty common to hit a shiny surface with sandpaper in order to roughen it up so a finish will adhere properly, and that was my first thought when I started reading your question. Is there some reason you don't want to do this?

-- Russ

  • Author

Hi, Russ,

Yes. Two reasons- look and feel.

The natural bamboo has a very natural and rustic look. Some customers like it, some don't.

The other reason and probably most important is feel. Most professionals that I sell to can immediately feel the difference. The tightest and most powerful fibers lie just beneath the skin and leaving them intact can truly make a difference in sound quality and response off the drum head. Sanding off the skin leaves the bamboo more susceptible to the elements too.

I have tried roughing up the surface as you suggested. In fact, the good folks at General Finishes suggested I do the same thing with Enduro Var and Exterior 450, but I still had problems with chipping.

Okay, if sanding is out, then the problem boils down to finding a finish and/or application method that will work. Here are some random thoughts. I don't have a clue if any of them will actually help.

1. Some woods are oily, and it can help to clean them with acetone just before gluing or applying a finish. This would be an easy thing to try, and I don't think it would change the characteristics of your mallets.

2. You haven't mentioned laquer or shellac as something you've tried. Shellac in particular is often portrayed as something that is compatible with a lot of materials and other finishes. "It will stick to anything, and anything will stick to it." I dunno if this includes bamboo.

3. Pen turners like to use Cyano Acrylate glue (a.k.a. "CA glue" or "superglue") for a durable high-gloss finish on their pens. Google turns up hundreds of hits on this subject. Superglue sticks to everything else; maybe it will stick to bamboo.

4. Maybe some sort of two-part epoxy or polyester resin would work. I don't have any specific hints here.

I think if I were you I would try #3 first, and then #1, and then hope you can find somebody who actually knows what they're talking about!

-- Russ

Or try very fine sandpaper before coating, don't cut thru the skin just enough to break the gloss. An abrasive pad or steel wool might work as well.

  • Author

Thanks, Guys.

I think CA glue might be the way to go. Not sure how I'll apply it smoothly to the bamboo since it's not a lathe, but I have a few ideas.

I have tried Shellac, but had similar problems with chipping and it was actually the weakest.

Tung oil did work the best out of all that I mentioned, but as I mentioned before it was a too slow for the turnaround time that I like to keep.

Best,

JM

What did the good folks at General Finishes have to say about the Wood Turners Finish ("WTF"). It's a thin wipe on product and competes with CA glue. The nice thing about the finish is it's resistant to the oils of human skin.

Again, I agree with the others, to etch the surface some to give the finish something to bite on and hold.

-Ace-

Try the video

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.