Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Any benefit to a 4" hose on a Dewalt 735 Planer?

Featured Replies

Hello, another dust collection related question.

I just picked up a Jet 1100 DC. It has the 4" wye right at the impeller intake on the unit.

Coming out of one of the legs, I want to put a run of hose to connect to a Rigid Oscillating sander (via a 2 and 1/2" wye) and to my Dewalt planer.

The connection port on the planer will allow for a 4" hose (which I was initially planning on using) but the actual opening is only 2 and 1/2". This machine is at the end of the line on this run. Is there any benefit to running a 4 " line to the planer? This machine ejects the wood chips with such force and the run is so short - probably less than 4 feet - that the chips would probably make it to the bottom of the DC without it being turned on.

To me it seems unnecessary to run 4", but would love your input if there would be any benefit. I may go that route anyway because I already have all the parts to make the connections.

Thanks for your help!

Basshunter

I have a Dewalt DW735 and ran a 4" line to it. It does have the fan assist ejection but with the 4" line pulling, almost no dust escapes. I'm kind of a overkill guy sometimes but less dust is always better.

I wouldn't run anything less than 4". I did once as that was all I had, and the planer ended up geting backed up like leaves in a rain gutter and I had to open the top of the unit to clean it out. A 735 teamed with a 4" DC is a super combination on taking care of messes.

I agree with the above comments. I connected it when I first got it with the 2.5" hose because that's all I had and it would spit chipsnout the front of the machine and inside as well. Once I connected it to the 4" haven't had the problem. Seems to be a more efficient way to contain the chips especially with the force of the exhaust. 4" is the way to go for sure.

Go larger if you can. Use 5" pipe, or even 6" pipe, if your DC allows for it. The larger diameter allows the DC to collect the fine dust much better than smaller diameter pipe.

Change the ports on your machines to accept the larger hose, or at the very least, use an adaptor at the machine (not at the DC).

I run 4" to my 735 mostly since it takes it and I don't need to worry about an adapter. Even though the opening on the planer is just 2.5", the larger hose will cut down and further resistance The 4" hose has over 2.5x the area of the smaller hose.

  • Author

Thanks guys. Will go the 4" route for sure. In fact, I was planning on running a 2.5" to the Rigid sander but now will run 4" to it with a reducer fitting at the machine.

My DC will only handle 5" on the in take. As I am just setting up the shop, I am just running 4" until I know I have a setup that workable. I have gates at every machine, I hope it works ok for now.

Thanks for the great feedback!

Basshunter

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.