Recommended Posts

Posted

Hi folks,

Just curious as to what people use for shaping wood or removing large amounts of material from attached chair legs and arms. Is the Foredome tool better over a die grinder with burrs or do they both do the same job?

Thanks,

Shane

Posted

How much are you removing? A 4.5" grinder with a Sir Lancelot blade on it will shred a tree in no time. I haven't used one, but a friend who does a lot of wood sculpting does. A Foredom with a burr grinder could be useful for details, but no hogging of material.

I don't have a Lancelot blade, but do use a RAS-115 rotary action sander. Certainly not as fast as the Lancelot blade but can be relatively fines dust-free (still get chips).

Posted

answer some questions that might helps us to answer your questions. which is something that you are doing?

how big are you carving if you planing on doing any larger scupture work then get the sir lancelot or even a angle grinder. http://www.youtube.c...blade-p-51.html think of it as a mini chain saw

if small then the foredom is a good tool for small hand held carving http://www.foredom.net/

if all your doing is fixing a tennen that is too long on a chair then i would go with a flush trim saw and then just sand it flush. http://www.bing.com/...1088429&first=1

if you shaping a new cair leg then best bet is a lathe which will be expensive but then you will have a lathe to make handles, bowls, boxes ect....

Posted

Thanks for the replies,

I am attempting a Sam Maloof dining chair where I need to make a gentle curve out of 90 degree joinery. (using walnut) I have a die grinder with burrs but was curious to the Foredoms abilities. I assume they are meant for finer work?

Thanks

Shane

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined