Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bench top - Hardboard or MDF?

Featured Replies

Hi all,

I'm looking for advice on a bench top in my new shop. I recently tore down an old house here in PA (built in 1901) and saved some really cool lumber from it. The sill plate for the whole house was 10" x 10" hemlock beams, which I am using for the legs for the bench. Then I'm using the 2x12 floor joists (three wide) for the bench top, but I'm not sure what to use to cover those for the finished top. I'm thinking hardboard or MDF. Any advice on which one would be better? Or maybe something different?

Thanks in advance,

Eggman

I generally go with MDF covered by one layer of hardboard. That way I can always change out the beat up top.

I'd probably plane the 2x12's smooth, rip them into 3" strips, glue them face to face, and have a proper bench top.

Indeed. Especially with legs made from 10" x 10" beams. A 1-1/2" thick top would look pretty silly perched upon such massive legs.

-- Russ

I use 2 layers of MDF. When the top gets busted up, I just change it out with a new sheet.

  • Author

The 2x12s are also old hemlock floor joists from the old house and are very dry. Not sure if they would work, plus I don't have a planer.

Sounds sad to put mdf over 100 year old reclaimed timbres. I like the idea of resawing the 2"x12"s. I'm a strong believer that your shop needs to be as cool as the pieces you make in it. MDF never comes in my shop! :)

You might want to check for ideas, too.

I've also seen some tables, don't remember if they started out as benches or not, that just went with the three wide approach you describe. As long as it's level, I don't see a problem.

I have hardboard on the top of my bench. I am been really happy with it.

My assembly table has a hardboard top that I can replace when I muck it up too much. I set the trim at a hieght that makes it flush when the hardboard is installed. I really love the extra longevity.

I do agree with bberchin...surrounding yourself with the quality of work you want to produce does set a tone in your shop. Those old timbers have some character. If you could find a way to give yourself the benefits that you desire with a "disposable" top and still show of the story of the timbers, I think that would be something special.

  • Author

All great stuff here; thanks for that.

I did some measuring today and found that I wouldn't have near enough of the floor joists for the bench top if I ripped and glued them. I think I'm going to go three wide then attach a piece of MDF covered by the hardboard. That will give me about a 3" top when finished, plus I can switch out the hardboard when it gets beat up. I don't think that will look out of place atop those 10" legs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.