Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finish for Ash

Featured Replies

I am covering one of my bedroom walls with ash boards and was wondering what type of finish to use. I'd like to keep it as natural looking as possible, but want to protect it also. My dad was concerned that polyurethane would yellow over time if I don't stain it first. Does anyone know if this is true, and if so, how badly would it yellow? Also, does anyone have any other suggestions for a finish? I am pretty much a novice. Any help is appreciated...thanks!

You can dye your wipe-on poly with compatible products if you want. it depend what you want really. i know a friend of mine did a light "brou de noix" sorry i dont know the english term (natural walnut seed "juice" coloring) then re-sanded the wood a little so the dye went into the pores of the ash, just like poping the grain on figured wood. then he applied a wipe on poly and it was amazing.

Shellac, perhaps?

a.) You can find shellac that's very pale, even less yellow than oils or urethanes

b.) Your walls won't be subject to heat or alcohol spills, shellac's two weaknesses

c.) It dries fast and can be done on-site without stinking up the whole house.

I think a nice "light color" oil stain to get into the grain and highlight. The Ash hard grain won't pick-up much, if any, stain. Ash is similar to oak. Stick to an oil based all the way through. Your going to need open time to work a large area, such as a wall, unless you like plaid design's. :) You may want to look at Watco danish oil and comes in a variety of tones. Watco gives you color and some protection and easy to repair if you get a scratch on the wood.

I would avoid applying a Poly type topcoat, such as used for tables and such. I think it would be difficult to get an even application and not look very well. Just a good thin oil finish is all you need in my opinion.

Yes your room may smell for many weeks. Do this when you can have the windows open in the house and find another room to sleep in. The ideal way to address this is to spray a water-based or are you going to pre-finish the ash before installation?

-Ace-

This is one coat of natural danish oil on curly ash. I need to sand it down and apply another. After that I will shoot the top coat.

breadboard.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.