TheFatBaron Posted October 24, 2012 Report Posted October 24, 2012 So, I'm having problems with my Stanley (pre-WWII, type 16, I think?) Jack Plane (No. 5). As the title says, every so often, the chipbreaker clogs like crazy, which kills the plane's ability to cut. I'll try sharpening the iron, moving it right up to the edge of the iron, backing it off, and eventually, one of the random adjustments seems to fix things. I'll use the plane for a project or two, and then bang- it's back to clogging (and failing to cut). Currently, my plane has seen only very light usage (some douglas fir, and a couple small pieces of jatoba) since its last sharpening. Is there something I'm missing here? I did see Chris Schwartz's blog post in a quick search, but I feel like (with the exception of putting a bevel on the chipbreaker itself), this seems like how it's set up. Thoughts? Quote
TimV Posted October 24, 2012 Report Posted October 24, 2012 I file my chipbreakers flat across the contact area of blade then use stones on that contact surface and also polish the backside radius of the chip breaker. I also set mine about a 1/32" or heavy from the cutting edge. I've found the biggest reason chips get caught is because there is not a seamless contact area betwen the blade and chipbreaker edge. Quote
jhl.verona Posted October 24, 2012 Report Posted October 24, 2012 Totally agree with Tim. You don't need to do it that often, because there isn't much wear on the cap iron (chipbreaker). I'll do it if I fine shavings between the iron and cap iron. Haven't had a plane clog on me in ages... John Quote
TheFatBaron Posted October 24, 2012 Author Report Posted October 24, 2012 Thanks guys - I'll take a look when I get home tonight and see if it needs to be flattened. Quote
CessnaPilotBarry Posted October 24, 2012 Report Posted October 24, 2012 Tim nailed it! If you look at some of the aftermarket breakers, they even _slightly_ back bevel, for lack of a better term, the part of the breaker that sits on the iron. This eliminates the chance of a gap that can catch a shaving. Quote
TheFatBaron Posted October 25, 2012 Author Report Posted October 25, 2012 So, I had a few minutes last night to take a look at things. The chipbreaker seemed to sit pretty flat - when held up to a light, I couldn't see any peeking through. I lightly sharpened the blade (since I had it out) and went to put it back in, and realized that the cap iron wasn't all that tight. I pulled it off, tightened the screw, and then put the cap iron back on and locked it down... and that may have been the problem. I took a couple quick passes and the results were better. Hopefully tonight I'll have a chance to finish flattening the piece I'm working on and confirm what's what. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.