pghmyn Posted October 24, 2012 Report Posted October 24, 2012 I'm working on an entertainment stand right now for a friend. The solid wood is Soft Maple. 3/4" face frame and 1" top. The plywood is 3/4" Hard Maple (hardwood dealer did not have Soft Maple). There will be four mission style doors on here. The sides and bottom middle cavity. https://www.dropbox.com/s/vzfp7i6pnzva2l4/table.JPG We decided on $400 for the price. Do you think this is fair? Quote
Drunken Woodworker Posted October 24, 2012 Report Posted October 24, 2012 Looking great! I really think $600-$800+ is a fair price. Quote
Eric. Posted October 24, 2012 Report Posted October 24, 2012 Since you're building it for a friend, "fair" is a bit subjective...but $400 is certainly not unreasonable. If you were building it for anyone else, I'd agree with the drunk guy...$400 is considerably too low. IMO. 1 Quote
duckkisser Posted October 24, 2012 Report Posted October 24, 2012 how good a friend is he and is he covering the cost of materials or are you paying for it out of the price you will get paid? Quote
pghmyn Posted October 25, 2012 Author Report Posted October 25, 2012 Relatively close friend. I went over the cost of materials with him, which should be around $170-$190 total. We agreed that $400 was pretty good. I am getting the chance to work with a new wood species and get paid for it. I think this experience alone makes up the extra couple hundred I could charge. There are a few things I would do differently next time I work with maple. Especially feed rate to prevent burning. Quote
pghmyn Posted November 2, 2012 Author Report Posted November 2, 2012 Update to the project. It has been taking a little longer than I anticipated because of school work and such. But, I have the face frame attached, shelves in place, holes for readjustable shelves drilled, and doors created and mounted. I just need to cut and install the back, then attach the top. https://www.dropbox.com/s/7ahvpt7b9ud0b0p/PB020940.JPG https://www.dropbox.com/s/mpqirmbdk6t27yr/PB020941.JPG Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.