RossC23 Posted November 9, 2012 Report Posted November 9, 2012 I needed a new table for my kitchen and I guess also just needed some garage/shop time and get the creative juices going. This is the result. The whole table is pretty much put together with hidden pocket screws. Wood choices were jactoba and birdseye hard maple. The each side has a birdseye hard maple leaf that i made on the scroll saw. I finished with a brush on sating poly. First pic the finish is still a little wet. Let me know what you guys think. Quote
TerryMcK Posted November 9, 2012 Report Posted November 9, 2012 Fantastic figure on the piece. The maple leaf is a nice touch too. Thanks for sharing. Quote
Beechwood Chip Posted November 9, 2012 Report Posted November 9, 2012 Looks great! How are you compensating for wood movement? I'm guessing a kitchen may have some changes in humidity, even if the house is air conditioned. Quote
RossC23 Posted November 9, 2012 Author Report Posted November 9, 2012 Well i do have AC and in the being that the winters in Wisconson get pretty dry I also have a humidifier hooked to the forced air furnace. I've used these two woods together in the past without much problem but we shall see I guess. Quote
Mister Pants Posted November 9, 2012 Report Posted November 9, 2012 Very nice, hopefully you won't have an issue with the trapped inside piece. Love that spalted birdseye maple. Quote
John's Woodshop Posted November 15, 2012 Report Posted November 15, 2012 LOVE the top!!! Nice contrast in the wood and a great finish. Love the Maple Leaf too! Quote
Guillaume Breton Posted November 16, 2012 Report Posted November 16, 2012 Very nice, hopefully you won't have an issue with the trapped inside piece. Love that spalted birdseye maple. i also hope it wont split right into that figure. gj it looks great ! Quote
Dave F Posted November 18, 2012 Report Posted November 18, 2012 I like it. Nice piece! Good job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.