groonpooch Posted November 13, 2012 Report Posted November 13, 2012 Hey all - wondering if you can help me out. Based on the recommendation from Fine Woodworking's Tool Guide, I picked up the Senco PC1010 for some light duty use in my shop (mainly for blowing dust off of projects, etc.). Anyway, just a day after getting it set up, I noticed it behaving strangely. I recorded a video of what was happening. It seems to cycle on like normal, but then about 50% of the time it will kick in to this "gargling" mode and be stuck in it unless I power it off and back on. I have some moderate power issues in my shop (I rent part of a house, so I'm utilizing a Tuff Shed powered by an extension cord running from the garage), so I'm wondering if this is a matter of the compressor not getting the juice it needs to work properly? Otherwise, I can only assume it's a faulty unit. Thoughts? Thanks for the help! David Quote
Dave H Posted November 13, 2012 Report Posted November 13, 2012 How cold is it out in the tuffshed I find my compressor doesn't like the extreme cold weather, when I bring it into the house to warm up it works fine after that. Quote
Nick2cd Posted November 13, 2012 Report Posted November 13, 2012 why don't you take the compressor to a reliable power source to determine if the gargling is coming from a poor power source or it the problem lies somewhere else. Quote
groonpooch Posted November 13, 2012 Author Report Posted November 13, 2012 How cold is it out in the tuffshed I find my compressor doesn't like the extreme cold weather, when I bring it into the house to warm up it works fine after that. It hasn't gotten below 50, so I would hope that's not the culprit! why don't you take the compressor to a reliable power source to determine if the gargling is coming from a poor power source or it the problem lies somewhere else. Thanks for the feedback. I did consider moving the unit, and will try it on a better source, but because of the intermittent nature of the issue, I was hoping to gain a bit of insight from the experts since the test could leave things inconclusive on its own. Quote
Boatworks Today Posted November 13, 2012 Report Posted November 13, 2012 is the unit only doing this when it's up to the cut out pressure (typically around 120-130psi) or is it doing this other times as well? Quote
groonpooch Posted November 13, 2012 Author Report Posted November 13, 2012 is the unit only doing this when it's up to the cut out pressure (typically around 120-130psi) or is it doing this other times as well? It seemed to be consistently doing it at the cut out pressure... Quote
Dave H Posted November 13, 2012 Report Posted November 13, 2012 Do you hear any bleed off after it reaches cut out pressure. Quote
groonpooch Posted November 13, 2012 Author Report Posted November 13, 2012 Do you hear any bleed off after it reaches cut out pressure. Honestly, I'd need to give it another listen. I can check tonight. Quote
Boatworks Today Posted November 13, 2012 Report Posted November 13, 2012 I think you have a faulty solenoid (guessing on the actual part name). Seems like the contact for the pressure cut out is not completely dis-engaging the motor. I'd be curious to see if you can hear any kind of arching or slight popping noise when it's cycling.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.