Recommended Posts

Posted

Thanks to a delay on starting my next project I am going to start my Roubo in a couple weeks and was wondering what thickness you deem adequate? I am bouncing back and forth between what I am going to use for the top, I have Rock Elm that I bought a boat load of years back and Hard Maple from a few trees I harvested several years ago. I think I would prefer the Maple because of the lighter color but the Rock Elm because I have more of it. With the maple I could harvest without much waste a 3 1/4" top but I was planning on 4", do you think I would notice the difference? The bench will be a little shy of 8' with a tool tray at the back and designed for handtools. I think I already know the answer but sometimes you have to hear it when you are thinking in terms of waste. I have Schwarz workbench book coming but with my brain going in circles I just have to ask. I would greatly appreciate any input you may have. Have a very Happy Thanksgiving!

Posted

If you're using the Benchcrafted hardware you'll want to shoot for 4" since the tail vise installation is designed around that thickness. You can still deviate from that thickness but you'll have to do some modifications if you deviate too much. If you're not using the BC hardware, it's up to you...and IMO 3 1/4" is probably adequate. That said, the thicker the better, right? At least to a point...5" is probably overkill.

If I were you I'd just use the elm since you have it laying around and you can get the full 4 inches out of it.

Posted

Hmm....thats a tough choice. Poor you ;)

My first thought is to use the elm for thicker top and because you have more of it.....but the hard maple is almost twice the hardness of the elm. Now, rock maple might be too hard for a bench but is elm too soft? Just something to think about.....

Also, elm is not as stable as maple.

Posted

I'm not going with the Benchcrafted hardware, instead of a leg vise I am sticking with my old Record vise, i love it and wouldn't want to be without it! That being said I do want to keep my options open for adding one in the future. I am adding a Wagon vise but am not sure about which hardware yet. I am having a second quick release vise on the tail vise side, my kids love making stuff the there are two of them so having two vises is a great thing. I thinki am going to go with the maple, this will be my "forever bench" and I don't want any regrets-at least that's where I am at today! Thanks for the input, greatly appreciated, any other input would also be super.

Posted

Well I decided since this is my "forever bench" that I am going with the maple for the top. I took stock the other day and I have just enough long boards for the top, worse case I would have had to buy one. I still have several 6' boards left for another project, one of which will be a moxon vise. I got all the pieces rough cut for the base the other night and hope to start on the top this week, just waiting for the wagon vise hardware. Keep ya posted.

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined