Ryguy1418 Posted November 25, 2012 Report Posted November 25, 2012 I found a Grizzly g1023 10" 3hp 220v cabinet saw that is about 10 years old. It's listed for $400 on Craigslist but I can prolly get it cheaper. The owner was a hobbiest woodworker who passed away and it looks fairly well maintained. All the cranks turn smoothly, and the top is dead flat which seems promising. However there is a bit of rust on the iron top. Is this easy to remedy? Also I wasn't able to test it out because the new house the women moved into has no 220v outlets. I was told it was in good working order when he passed away 4 months ago. So whats everyone's thoughts....is it worth it? Is it too much of a risk? What would a reasonable price be? Thanks for the advice! Ryan Quote
Ryguy1418 Posted November 25, 2012 Author Report Posted November 25, 2012 Also it has all its original parts, faceplates, fence etc. even the owners manual. Quote
dodgeram99 Posted November 25, 2012 Report Posted November 25, 2012 The rust problem is easy to fix. Use WD 40 and either 2000work or 4000I sand paper and lightly sand the rust area then mineral spirits to clean all the WD40 off. Then use a Top coat or Bioshield on it followed by a past wax. Quote
markhochstein Posted November 25, 2012 Report Posted November 25, 2012 That sounds like a good deal to me. The G1023 was a good saw. Is this the 52" rip version? If so I think you've got a solid buy on your hands there. To get rid of the rust I would use a Sandflex Hand Block - medium grit. Buy a set of all three grits on Amazon. They're great to have around for tool and machine cleaning. Quote
Ryguy1418 Posted November 25, 2012 Author Report Posted November 25, 2012 No it's not the 52" rip version, I didn't know they made one! Quote
Ryguy1418 Posted November 26, 2012 Author Report Posted November 26, 2012 It's actually a g1023s.......and how would I set up dust collection with the motor side of the cabinet completely open. Guess I'm gonna go custom panels with a dust port. Quote
knotscott Posted November 26, 2012 Report Posted November 26, 2012 If it runs, is single phase, and in reasonable shape with a fence, it's worth close to $400 in parts IMO....not much downside. Here's what it should look like under the hood: Quote
Mister Pants Posted November 26, 2012 Report Posted November 26, 2012 Surface rust is really easy to fix, I've had to deal with it a few times. You'll still see the spots as they'll be a different colour once you deal with it (I use topsaver and a scrubbing pad personally), but it will be just as slick and work just fine. $400 doesn't sound bad at all. Quote
TRBaker Posted November 27, 2012 Report Posted November 27, 2012 Four hundred is a great deal if the saw is in as good a condition as you say. +1 to what mccullin said about rust removal. Quote
Ryguy1418 Posted November 27, 2012 Author Report Posted November 27, 2012 Bought it for $300 and the girl threw in a shop fox mobile base too. Got it home and it fired right up.....I'll clean it up tomorrow if I have time. Thank you for the help guys! Quote
knotscott Posted November 27, 2012 Report Posted November 27, 2012 Nice! Buy a good blade with the money you saved! Quote
Ryguy1418 Posted November 27, 2012 Author Report Posted November 27, 2012 Can you recommend a good blade, and any links to an overhead dust collection port I can buy/ make. Also does anyone know how much the grizzly motor cover costs? Quote
Mister Pants Posted November 28, 2012 Report Posted November 28, 2012 I'm still partial to the Forest WWII blades myself, if you're on a bit more of a budget the Freud Industrial blades (not the Diablo's they sell at HD) are also quite good. Not sure which cover you need, but they have an online link with pricing for replacement parts:http://www.grizzly.com/products/G1023/parts/MAIN Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.