Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting tools into a basement shop

Featured Replies

Whether I start buying tools for my future shop at my fiance's parent's house, or for my actual parent's house, I am going to have to get some pretty heavy tools down those dreaded 10 stairs. I've been looking at tools like the jointer for example, which weighs nearly 600 pounds. I have some strong friends that can lift that with ease, but fitting all of them in a narrow staircase is another story.

How many pieces do large jointers usually come in? Is it just base and actual jointer, or more parts that will be easier to carry?

I'm not sure how many pieces large jointers come in but I can tell you from experience an appliance dolly from U-Haul only costs $10/day to rent and can make a huge job a lot less difficult.

That's quite a challenge.

Large jointers usually come in 2 pieces, the head and the base. If you need to, you can probably dis-assemble them a bit more to make moving easier.

I am so glad that I don't have to take tools down the stairs in my current house!

Basement shop suck and that's all there is to it. We worked out of one for years until we built the pole barn. It had a 90 degree turn at the top and bottom of the stairs so there were always issues with getting long lumber in and larger finished pieces out. All of the large equipment had to be disassembled when it was moved in and finally back out. We have an 8" PM jointer and had to remove the bed and cutter head from the base to move it. It's easy to do but you will need several strong friends to help move it.

Put 2x's or 3/4" plywood strips on the stairs, and slide things down. A web tow strap, available at any chain auto store, Harbor Freight, or Wal-Mart, to allow helpers to get a better grip, can also be helpful.

One thing to keep in mind... If it's a house built with an unfinished basement and stairs similar to a deck, closely inspect the stringers themselves and the attachment to the joists.

  • Author

To get stuff into my fiances parents house I would have to go around the back, up the 4 deck stairs, then it's a straight shot from the door down the stairs. Once it is down the stairs, it will be easy to get into the shop. Those stairs are what will suck though :) my parents house has a few more bends in it.

Laying plywood on the center of the stairs to slide heavy loads works well, especially if you can get away with a few screws into the stairs. Maybe a ratchet come-a long would help.

  • Author

Put 2x's or 3/4" plywood strips on the stairs, and slide things down. A web tow strap, available at any chain auto store, Harbor Freight, or Wal-Mart, to allow helpers to get a better grip, can also be helpful.

One thing to keep in mind... If it's a house built with an unfinished basement and stairs similar to a deck, closely inspect the stringers themselves and the attachment to the joists.

Laying plywood on the center of the stairs to slide heavy loads works well, especially if you can get away with a few screws into the stairs. Maybe a ratchet come-a long would help.

I really like the idea of adding something to slide the load on. I just thought about something too, I have a riding lawn mower. What if I tied a very strong strap to it, and moved slowly so the tool would glide down the stairs.

The mower weighs about 500 pounds, then my 155 pounds, then one of my 250+ pound friends :) Should be able to fight a 600 pound jointer with a coefficient of friction value that is high on rough wood.

Once you're on a flat surface, don't forget golf balls and sections of 1" PVC to move things around.

Once upon a time, as a solo flooring installer, I moved more than my share of heavy things, including fish tanks. If it's got legs, put 3/4" plywood on the pipes or balls.

I got my SawStop Industrial Cabinet Saw pallet off my trailer and into my shop alone, using PVC pipe and a crowbar.

  • Author

Once you're on a flat surface, don't forget golf balls and sections of 1" PVC to move things around.

Once upon a time, as a solo flooring installer, I moved more than my share of heavy things, including fish tanks. If it's got legs, put 3/4" plywood on the pipes or balls.

I got my SawStop Industrial Cabinet Saw pallet off my trailer and into my shop alone, using PVC pipe and a crowbar.

I will have to come through the back yard to get to the back door. It is fenced in, and a distance of about a football field from the gate to the back door, and all grass :( I was thinking about making a make-shift trailer, or something to tow behind the lawn mower.

I should mention also that there is a hill to go up about half way through. It is about a 4 foot climb at about a 35-40 degree slope. That part may just be the worst, but with the mower I know it will help.

Check the tire pressure on your mower. Lower pressure will keep the tires from spinning when you tackle that hill. Clean out any dirt from the treads. You might check around the neighborhood for a lawn sized trailer to borrow or maybe a rental place might have one. Keep the trailers tires inflated to handle the weight.

Sounds like a workable approach, but draft as much help as possible in case something goes wrong.

I wouldn't get the mower involved. I made a ramp for my 13 or 14 step stairway. If it's in a crate, it's easy to slide. If not, it will help a great deal.

IMG_0581.jpg

How many pieces do large jointers usually come in? Is it just base and actual jointer, or more parts that will be easier to carry?

I just ordered the G0656P 8" jointer from Grizzly. They have a video that compares all of their 8" jointers. You can find the video on this page (the video link on the left).

http://www.grizzly.com/products/8-x-72-Jointer-3-HP-w-Mobile-Base-Polar-Bear-Series-/G0656P

At the 4:05 mark, they indicate the shipment for this jointer is in 2 boxes. The first box is 390 pounds and measures 80x24x14. The second box is 132 pounds and measures 30x20x27.

  • Author

I just ordered the G0656P 8" jointer from Grizzly. They have a video that compares all of their 8" jointers. You can find the video on this page (the video link on the left).

http://www.grizzly.com/products/8-x-72-Jointer-3-HP-w-Mobile-Base-Polar-Bear-Series-/G0656P

At the 4:05 mark, they indicate the shipment for this jointer is in 2 boxes. The first box is 390 pounds and measures 80x24x14. The second box is 132 pounds and measures 30x20x27.

Perfect! Those shouldn't be too hard to get down the stairs when the need arises. Thanks :)

Ugh. I feel sorry for you man. I can't imagine being in a basement unless it was a walk-out with easy access 'round the back, or at least knowing you're never gonna move. I thank the woodworking gods for my garage shop every time I bring home a new tool or lumber or sheet goods.

I'm fortunate to have walk-out access... Being in a hole would be really tough. While I complain about things like ceiling height, and having to do extra work for finishing smell extraction, this time of year I really enjoy having a workspace that never drops below 60F, without spending a nickel more to heat it.

Good story, related to the stairs, though... About 5-6 years ago, I bought Powermatic 719 freestanding mortiser. It was winter, and I had no truck access to the back doors, due to about a foot of standing snow, and getting out requires climbing a 35-40 degree hill. The boxes sat in my garage for a few days, as I waited for the snow to recede to 4WD depth. I reached a point on a project where I could use it. So... one night, I'm home alone, and there may have been a few Harpoon IPA's opened. I decide to wheel it down the stairs by myself!

I load the box containing the upper section and motor onto my hand truck, strap it all together, and carefully wheel it through the kitchen to the basement door... As the wheels of the hand truck drop off the landing towards the first step, the entire rig just wants to take off down the stairs! With a firm grip on the hand truck, I manage to jam my feet onto both sides of the door jam. My hands are between my knees, and my butt is now on the hallway floor. It's too heavy to remove even one hand, I'm alone, and I can't get it back up to the landing. I spent the next 10 minutes bent into a pretzel, STUCK!

As I sat there wondering how long I could hold out, and when my wife might be coming home, I was picturing my brand-new mortiser smashing into the concrete wall 3 feet from the bottom step. I was also wondering how much damage it was going to do to the foundation, the fact that it's winter, and due to the front porch and curtain drains, how difficult a crack would be to access.

I finally was able to "leg press" my whole body back in the hallway, as I pushed the handle down, levering on the hand truck's stair rails, allowing the wheels to pop back up on the landing. It worked, but the box landed on ME, after denting the drywall in the hall. The final damage was only some nasty bruises, really irritated hands from stretched skin, and some drywall and paint work, but I sure did gain valuable experience! ;^)

With help from a neighbor, the tool went easily downstairs, with zero drama...

I've done my share of smaller tools down to a basement. if they are still in the box, you can use any hand truck, not just the appliance dolly. (Although the appliance dolly has that wider base and stance, it sometimes does not fit, especially if you have a curve to go through.)

If your hand truck does not have straps, some moving straps and bungee cords work fantastically well. And they can be added without any fuss, thanks to the various braces, bars, and chunks of metal they are made from. I firmly, strongly, whole heartedly believe that a hand truck is an absolute shop essential for every wood worker. Combine that with the engine hoist Marc mentions he has in his shop to move larger tools around, and you have a pair of highly useful tools for single person capability.

The ratcheting tow straps, or come-alongs, are another great tool. Sink an anchor point in the yard if you don't want to bury something into the house, and you can use it to slowly lower or raise items to the basement. (Of course, this only works for someone with a straight shot or a window at the top of the landing.) Otherwise, you will absolutely need two people. You can also look into the mover's straps, but those I would purchase from a moving supply company, or see if your local fire department has any decommissioned fire hose they would be willing to give/sell/donate to you.

Think of most tools like a large refrigerator or sofa. Sure, one person can do it. But two make the process go by not just twice as fast, but often five or six times as fast. (And trained people make it go by even faster!)

To make your hand truck more functional, add a plywood tongue to it. By this, I mean a solid piece that can either rest against the back or be left along the metal lip at the bottom that will extend the usable "lift point" at the bottom. If the tool has legs, or does not fit under the truck, the plywood base will merely assist lifting, not support the entire weight. A simple notch on the back edge will allow you to get deeper support, and you can now add a brace board with a pair of screws to the back edge, inside the truck frame.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.