Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Low VOC substitute for Oil-based paints?

Featured Replies

I've made some built-ins for my kid's new bedrooms (<1 yr and 4 yrs old). I love the finish of a sprayed on oil-based paint... it just looks so perfect on woodwork. But, like every good dad, I'm concerned about protecting the little ones. VOCs have gotten a lot of attention recently, and I wonder are there any viable alternatives to oil-based finishes that give me a better-than-latex look that are safer than oil?

Alternatively, my kids aren't in these rooms now... and waiting another month won't change anything in the scheme of things... would waiting it out make a difference?

Thanks for any insight.

Don't know where you are, but in much of the US you can't even buy oil paint anymore (at least not for wood)... Here in NJ, you have to order it for 'metal applications' to get a gallon. You can get oil primer and quarts of trim paint (too thick to spray), but that's about it. There are some latex paints formulated for spraying and they look good -- not oil -- but good. Avoid the cheap ones -- they are formulated for contractors spraying an entire home at once. There was a list of high-quality sprayable paints on fuji's website at one point... I have it somewhere, and will take a look...

Go ahead a spray what you love. Kids probably receive more harm drinking beverages with corn syrup. Once a finish has cure and done gassing off you should be fine.

Lots of water based options exist for you.

Don't know where you are, but in much of the US you can't even buy oil paint anymore (at least not for wood)... Here in NJ, you have to order it for 'metal applications' to get a gallon. You can get oil primer and quarts of trim paint (too thick to spray), but that's about it. There are some latex paints formulated for spraying and they look good -- not oil -- but good. Avoid the cheap ones -- they are formulated for contractors spraying an entire home at once. There was a list of high-quality sprayable paints on fuji's website at one point... I have it somewhere, and will take a look...

Same here in Ontario. Can't even buy oil based paint anymore.

I personally love how oil finishes also but hate that it yellows over time. I run strictly water borne material now. General Finishes almost exclusively. I use there tinted poly of all kinds of stuff. It sprays great and drys fast. They will also tint it to many different major paint company swatches.

  • Author

All great stuff guys... thanks. I'll check out some of the general finishes stuff before making up my mind.

I live in florida... no issues buying oil based paints here. In fact, I had put some organic paint on the walls a few years ago, and pulled it out of the shed for a touchup during this project. When I opened the can, it was filled with mold!

Incidentally, organic paint is not very durable at all, so I wonder what I'm really saving by the constant repaint... I saw an EPA article that stated that No-VOC does not mean that it does't give off VOCs during outgassing, it means that there are no VOCs in the formula.

One more question... how long does it take to actually full cure and outgas? I can't seem to find a definitive answer on this one...

=> One more question... how long does it take to actually full cure and outgas? I can't seem to find a definitive answer on this one..

That is a good question. About as long as it takes for a flesh wound to heal. Finishes start curing immediately after they dry. A lot dependeds on what kind of product it is, who made it, drying conditions, how many coats you applied. Personally, I feel fully curred is about 30 days with the exception of UV curred finishes that take about 7 days.

Hope this helps.

-Ace-

  • Author

Thanks all, for the comments... I ended up going with General Finishes Milk and Poly topcoat. Heard great things about it, and I think it will be durable... expensive, but good. If I can get over the flu, I'll be spraying it over the next week.

Glad to hear your trying the water-based route. Yes to the expensive, the cost of water-based raw materials has been on the increase.

I'm trying to use water based finishes for everything these days. I only buy General Finishes and I've been pretty happy with the results. Water based finishes have come a long way.

chris

If I paint a project my choice is water base ... if I want to express the grain, apparently oil is the only way to bring it out. I do not know much about finishing but one of the guys that sells water base for Campbell told me that so there you have it.

One thing I demand from any finishing product is flexibility and move with the wood.

  • 3 months later...
  • Author

Hi all,

 

Just wanted to update on my results after a few months of living with the results.  I sprayed 1 room with oil-based paint, and 2 rooms with General Finishes Milk/Poly

 

1) I'm in love with general finishes products. I doubt I'll ever touch oil for interior wood work again.

2) The waterborne GF Milk/Poly is every bit as good, and in my opinion, better than the oil-based finish (cleanup is easier, won't yellow over time, a separate poly coat gives more options, etc, etc). They are virtually indistinguishable in durability, look and feel.

 

A note on outgassing... the oil room took a few solid weeks to be bearable (even using drying agents). The waterborne GF rooms took a few hours or so.

 

Thanks all for the help... this forum was truly helpful.

 

Angelo

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.