Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Orange peel with Earlex 5500

Featured Replies

Just started using the Earlex sprayer with Target EM6000 lacquer. Practiced on maple ply shop cabinets and everything was fine. Nice smooth finish. Began working on a cherry bartop for a customer and got all kinds of orange peel in the finish.

I sanded to 320 grit, one coat of de-waxed shellac, sanded, removed dust with vac and tack cloth and began to spray. Temperature was good. Sanded between coats but finish was not good. Did I spray to heavy a coat? Only difference between my practice and the cherry was I went from satin to semi-gloss laquer.

Thanks,

Rick

Are you new to spraying in general? Could be your spray technique, how far or how close to the workpiece are you?

Are you applying a nice wet coat or are they dry coats and just rough from "dry spray?" A picture would be helpful to see what is going on. Another concern, any reason you didn't practice your finishing schedule on a hunk of cherry? :) What happens to a maple cabinet may not always react the same to shellac and cherry, as to products and so-fourth, meaning did you follow the same schedule?

How old is the EM6000. Is the EM6000 nice and white/milky looking? This time of the year shipping in the cold and left out on the front porch could freeze the product?

-Ace-

  • Author

The laquer is new and it has never frozen. I practiced on the maple because it was there. I have always finished cherry using shellac as a sealer and had no problem. I hope it is my technique - I can fix that. I have a couple of cherry doors I'll practice on next.

thanks

I use to follow the Target forum years ago. I recall an issue with certain turbine sprayers that too much heat built up from turbine spraying and had actually heated the material to the point, whereby it was drying the finish out, thus reducing the open time for the water-based to flow out on the wood. As in solvent lacquer, on hot days the surface dries too fast and tightens up causing orange peel.

I sprayed about 2 gallons of EM6000 with a compressed air gun. I didn't have any issues, but have heard it can be fussy finish. Also remember that if solvent shellac was under EM6000. Was recommended to use flake shellac due to it being fresher and helped prevent crazing.

Also was recommended to apply in light coats. I would apply 2 light coats, wait for it to tack-up then hit it with a good wet coat. A good wet coat will start to turn bluish. On vertical surfaces, just spray wet enough before it starts to run....sounds easy right.... :)

Hope this helps.

-Ace-

Low RH with warm temps is usually the cause this time of year. For example my shop right now RH 21 @ 69f dp 27. Can't spray em6k out of the can without orange peel. Add the heat from the turbine as Ace suggested it would be alot worse. The Earlex usually doesn't heat up like multistage turbines.

Don

==> shop right now RH 21 @ 69f dp 27d

now that's low... I have an in-line humidifier that keeps it around 40RH... Helps quite a bit...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.