Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Waxing Arm-r-seal on a table top

Featured Replies

This is the first project that I'm using Arm-r-seal on (and I love it!!!). I just finished applying the 6th or 7th (I lost count) coat on a red oak dining room table, and was thinking about giving it a coat of Fiddes wax as a final touch. Good or bad idea? If good, how long do you suppose I should let the last coat cure before waxing it? Thanks in advance!

I personally wouldn't wax a dining room table. You won't gain any protection from it and will have to reapply periodically. Your varnish will cure to give good protection and look great.

  • Author

Ok, thanks. I figured it wouldn't add any further protection but I was just thinking wax may help to fill some of the open grain of the oak just a little and keep from too much gunk getting built up. At the start of the table top, I contemplated filling the grain but I didn't find a product/technique that I liked the results of. I like the visual effect of open grain, just wish it wasn't so deep.

Our dining room table is also red oak and I used a varnish similar to ArmRSeal. The opens pores haven't been a problem at all and it still looks great after 7 years. I would be easy on the table the first month while the varnish cures and try and clean with only water during that time.

6 or 7 coats of armrseal should of done a fine spiffy job of filling the grain? Are you thinning it? Just curious. :)

  • Author

Thanks, estesbubba. Will do.

 

Ace, I didn't thin it at all and it didn't fill the grain much. Oh well. I'll leave it as is and see how it goes. I'll chalk it up to a learning experience.

To really fill the grain you would have had to use a filler prior to applying the Arm R Seal.  That is the only way to get a smooth finish with oak.  I agree that wax just means more work in the future.  If you want a satin finish go to Woodworking.com and seach for rubbing out a finish.  I have used this method and it works wonderfully and is very easy. This method utilizes wax on 0000 steel wool but you don't leave any wax behind.  I don't think you could rub out a gloss finish on oak unless you had filled the wood first though I have never attempted to do so.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.